517D106M025JA6AE3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are widely used in a variety of electronic circuit designs. The specific capacitor code 517D106M025JA6AE3 refers to a aluminum electrolytic capacitor produced by a specific manufacturer. Generally speaking, electrolytic capacitors are miniature, low-cost devices designed to store electrical energy while ensuring high power density.Aluminum electrolytic capacitors, such as the 517D106M025JA6AE3, are designed to provide a higher capacitance-voltage ratio than ceramic device devices. They consist of two aluminum foils, one of them is energized and the other is encapsulated in an electrolyte. Electrolytic capacitors provide a combination of low cost, high capacitance, high energy density and low leakage current.

Due to their high capacitance-voltage ratio, aluminum electrolytic capacitors can be used in a wide variety of applications, such as power supplies, amplifiers, oscillators, and voltage referencing. The 517D106M025JA6AE3 in particular is designed to specifically handle higher voltage or "ripple current" applications due to its increased capacity and strong dissipation rating. This makes the 517D106M025JA6AE3 a popular choice for high output and large volt pulse circuits.

The 517D106M025JA6AE3 is capable of handling temperatures up to 105℃ and has an operating life of up to 1000 hours. Its rated capacitance is between 25 to 105 μF and its rated voltage is 450V. It also has a specific current leakage of 3.5uA at 25°C and a dissipation factor lower than 0.030. The 517D106M025JA6AE3 is also offered in a range of sizes, depending on the manufacturer, from �1210 to �1812.

The primary components of an aluminum electrolytic capacitor are the two sets of aluminum foil, the cathode and the anode, inserted in the pre-hydrated solution of the activated electrolyte. The insulating element, or separator, is installed between the two foils to keep the conductor’s electrical charge from spreading. The charge on the cathode attracts ions from the electrolyte and forms a condensed layer of ions on the anode. This is an electrolytic solution and forms an energy storage capacity (capacitance) between the two foils.

To summarize, the 517D106M025JA6AE3 is a high performance aluminum electrolytic capacitor designed to store electrical energy and ensure high power density. It is suitable for high voltage or “ripple current” circuits due to its increased capacity and strong dissipation rating. It can handle temperatures up to 105℃ and has a specific current leakage of 3.5uA at 25°C and a dissipation factor lower than 0.030. The 517D106M025JA6AE3 is capable of providing reliable performance in a wide range of applications.

The specific data is subject to PDF, and the above content is for reference