517D476M050AA6AE3

Polarization:	Polar
Package / Case:	Radial, Can
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	0.433" (11.00mm)
Size / Dimension:	0.248" Dia (6.30mm)
Lead Spacing:	0.098" (2.50mm)
Ripple Current @ High Frequency:	250mA @ 10kHz
Ripple Current @ Low Frequency:	125mA @ 120Hz
Applications:	General Purpose
Ratings:	--
Series:	517D
Operating Temperature:	-55°C ~ 105°C
Lifetime @ Temp.:	2000 Hrs @ 105°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	50V
Tolerance:	±20%
Capacitance:	47µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Aluminum Electrolytic Capacitors, or AEC, are generally used for several different applications due to their high current capacity, good electrical insulation, and good frequency response. The 517D476M050AA6AE3 capacitor is a type of AEC and is a highly reliable capacitance with very low internal resistances.

Applications

One of the main applications for the 517D476M050AA6AE3 capacitor is for power supplies in electronic devices or equipment. These capacitors are rated for high voltage, due to their robust construction, and are able to withstand extreme temperatures and environmental conditions. As such, they are commonly found in power supplies for computers, telecommunication systems, and power systems.Another popular application for the 517D476M050AA6AE3 capacitor is for signal filtering and power conditioning. The capacitor\'s characteristics make it well suited for applications requiring low impedance paths for high frequency signals. AECs are also often used in medical equipment for low pass filtering applications.Other common applications include consumer electronics, automotive electronics, and renewable energy systems. The 517D476M050AA6AE3 capacitor can also be used for electromagnetic interference (EMI) suppression.

Working Principle

AECs are essentially a two-terminal electrical component made up of an electrolyte and two conductive plates (an anode and cathode). The two conductive plates, which may or may not be made of aluminum, are separated by a dielectric material, usually a thin layer of oxide. When a voltage is applied to the two terminals of the capacitor, an electrical current is created which causes ions to build up on the anode and cathode plates, resulting in a decrease in the resistivity of the oxide layer. This decrease in resistivity allows more electrons to be collected, increasing the capacitance of the component.The capacitance of the 517D476M050AA6AE3 capacitor is limited by its design and construction. The design of the two terminals and the oxide layer decide its capacitance. The capacitance also varies over temperature and a variety of other environmental factors.

Conclusion

The 517D476M050AA6AE3 capacitor is a typical type of AEC, and is widely used in many applications. Its reliable performance and extraordinary capacity make it a preferred choice for power supplies and signal filtering applications. Its construction and design dictate its capacitance, as well as the environmental factors that affect it.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description