532BA000233DGR

Function:	Enable/Disable
Current - Supply (Disable) (Max):	75mA
Package / Case:	6-SMD, No Lead
Height:	0.071" (1.80mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Current - Supply (Max):	98mA
Operating Temperature:	-40°C ~ 85°C
Frequency Stability:	±50ppm
Voltage - Supply:	3.3V
Output:	LVDS
Series:	Si532
Frequency - Output 4:	--
Frequency - Output 3:	--
Frequency - Output 2:	125MHz
Frequency - Output 1:	100MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pin Configurable/Selectable Oscillators

A pin configurable/selectable oscillator, such as the 532BA000233DGR oscillator, is an oscillator with additional pins that enable the ability to switch frequency modes and other parameters. This type of oscillator can be used to tailor different settings to meet a variety of uses. This article will explore the 532BA000233DGR oscillator and its application fields and working principles.The 532BA000233DGR oscillator is an ultra-low jitter, circuit-selectable oscillator with a 30.72 MHz and 38.88 MHz crystal frequency reference. It features a differential output voltage of 33 and 5 volts, with a duty cycle of 50-79%, a rise time (20-80%) of 8 nS, a fall time (20-80%) of 6 nS, a maximum propagation delay skew of 0.5 nS, and a maximum jitter (RMS) of 0.3 pS. It has a 3.3V logic supply, a 0.8V analog supply, and 10K pull-ups on the eval/pins.The application field for the 532BA000233DGR oscillator is broad. It can be used in applications such as industrial automation, robotics, aerospace, networking, and consumer electronics. It is also suitable for use in high-precision timing, synchronization, and control applications.The working principle behind the 532BA000233DGR oscillator is quite simple. The main component of the oscillator, the frequency-selectable resonator, contains two crystal-mounted oscillator stages, one for low-frequency operation and one for high-frequency operation. The resonator is set to either low-frequency or high-frequency operation via an eval/pin. During operation, the crystal resonator generates a signal, which is then distributed by the output amplifiers to all of the output pins.The 532BA000233DGR oscillator also has frequency-selectable outputs, which allow users to select different frequencies in order to optimize their system’s performance. The frequency can be changed by setting the eval/pins, which is done through the use of a programming interface or by manually adjusting the controls on the device. The 532BA000233DGR oscillator is also designed to provide a high degree of frequency stability. This is achieved by using a temperature-compensated crystal oscillator (TCXO), which is designed to minimize frequency drift due to temperature changes. Additionally, it also has a high level of output drive, allowing it to operate at higher frequencies than other oscillators. The 532BA000233DGR oscillator is a versatile and reliable device, capable of meeting a variety of needs. Its broad range of applications, combined with its high level of frequency stability and selectable output frequencies, make it an ideal choice for use in a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description