600D157G030DG4E3

Operating Temperature:	-55°C ~ 125°C
Package / Case:	Axial, Can
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	--
Size / Dimension:	0.375" Dia x 1.375" L (9.53mm x 34.93mm)
Lead Spacing:	--
Applications:	General Purpose
Ratings:	--
Polarization:	Polar
Series:	600D
Lifetime @ Temp.:	--
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	30V
Tolerance:	--
Capacitance:	150µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Aluminum electrolytic capacitors are a type of electrically polarized capacitor. They are made from two metal sheets that are generally aluminum or an aluminum alloy separated by a paper or plastic spacer or dielectric. An electrolyte is then added to complete the capacitor. Aluminum electrolytic capacitors are widely used in many electronic circuits because of their attractive features like small size, cost effectiveness, and high capacitance. This paper will discuss the 600D157G030DG4E3 application field and working principle.

Working Principle

The technique behind a typical aluminum electrolytic capacitor involve two layers separated by the dielectric and lined with an electrolyte. The two surfaces consist of an aluminum foil, where the foil acts as the anode and the other side acts as the cathode. When electricity is applied to the anode, it turns into a positively charged surface and creates a layer of oxide. This layer of oxide provides the thickness for the dielectric and is approximately 0.1 µm in thickness. It is what gives the capacitor its large amount of capacitance. The electrolyte contains cations (positively charged particles) such as hydrogen that can interact with the anode surface and forms a chemical bond. When the capacitor is charged, there is an electric field between the two layers. This electric field creates a charge on the surfaces. The flow of electrons may cause current leakage in the dielectric but is blocked when the thickness of the oxide reaches its maximum. This is what stops the capacitor from charging further. The electrolyte is responsible for the constant charge that is maintained between the anode and cathode surfaces.

Applications

Aluminum electrolytic capacitors are widely used in many applications. They are often used in low-frequency filtering, signal filtering, and decoupling. They are also used in switched-mode AC and DC power supplies where they are often used to filter the input or output of the power supply. They can also be used in voltage multipliers, AC line cords, power factor correction, and other applications. The 600D157G030DG4E3 is an aluminum lymphatic capacitor that can handle large ratings with a full voltage range up to 175 Volts. It is a high stability and ripple current with capacitor values up to 3 µF. It features low ESR and impedance parameters, high thermal and chemical resistance, excellent temperature coefficient, and low-profile design. It is ideal for applications in mains frequency, that require a high ripple current and improved energy efficiency.

Conclusion

Aluminum electrolytic capacitors are a versatile type of component that can be used for a variety of applications. The 600D157G030DG4E3 is a specific type of aluminum electrolytic capacitor that has a wide range of application. It has an impressive range of features and parameters making it ideal for many applications. The working principle behind its operation is based on the principles of charge and discharge that use electricity. The dielectric and electrolyte create a capacitance and help to maintain a constant charge between the electrodes.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description