672D337F025DT5D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors are widely used in a variety of electronic devices. They are commonly used for voltage stabilization in power supplies, as well as power-on/power-off operations in memory and microprocessor circuits. They are also used in linear voltage regulators, switch mode power supplies, motor control devices, digital signal processors, digital cameras, radios, and automotive electronic systems.

Aluminum electrolytic capacitors were invented by Otto von Guericke in 1745, and are a type of electrolytic capacitor. This type of capacitor tends to have higher capacity and longer life than other types of capacitors, due to their construction. The anode and cathode of an aluminum electrolytic capacitor consist of an aluminum foil and a metal oxide film, respectively. The two foils are etched and connected together, and separated by a layer of electrolyte. The electrolyte is usually a gel containing water, and helps to absorb the charges from the underlying aluminum foil.

672D337F025DT5D application field and working principle

The 672D337F025DT5D Aluminum Electrolytic Capacitor is a high-capacity capacitor used for voltage regulation and power-on/power-off operations in a variety of electronic circuits. The 672D337F025DT5D has a voltage rating of 25V, a wide temperature range of -40°C to +85°C, and a capacitance of 6000uF. The 672D337F025DT5D has a tolerance of ±20% and is rated for an endurance of 2000 hours at 105°C. The capacitor features a low ESR (Equivalent Series Resistance), which helps make it suitable for high-frequency and bulk power applications.

The 672D337F025DT5D Aluminum Electrolytic Capacitor has a typical working principle similar to other aluminum electrolytic capacitors. When connecting the capacitor to a circuit, electrons accumulate on the aluminum foil and the metal oxide film. This creates a potential difference between the two components, and a dielectric layer forms to prevent current flow between them. When the source voltage is applied to the capacitor, current flows through the electrolyte and causes electrons to be transferred from the aluminum foil to the oxide film. This causes the electric field across the capacitor to increase, thus increasing the capacitance. The stored charge in the capacitor can then be used to provide voltage stabilization and power-on/power-off operations in memory and other electronic circuits.

Overall, the 672D337F025DT5D Aluminum Electrolytic Capacitor is a highly reliable and cost-effective solution for a variety of voltage regulation and power-on/power-off operations in memory and other electronic circuits. With its high capacity and wide temperature range, it is an ideal choice for commercial, industrial, and automotive applications.

The specific data is subject to PDF, and the above content is for reference