74FST6800DTR2

Series:	74FST
Packaging:	Tape & Reel (TR)
Part Status:	Obsolete
Type:	Bus Switch
Circuit:	10 x 1:1
Independent Circuits:	1
Current - Output High, Low:	--
Voltage Supply Source:	Single Supply
Voltage - Supply:	4 V ~ 5.5 V
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Package / Case:	24-TSSOP (0.173", 4.40mm Width)
Supplier Device Package:	24-TSSOP
Base Part Number:	74FST6800

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74FST6800DTR2 is a logic signal switch and multiplexer/decoder. It is an eight-bit register file with two separate four-bit registers, each with its own data and enable inputs. The 74FST6800DTR2 can be used to switch or multiplex between two sets of signals or to decode a four-bit binary value, depending on the configuration.The 74FST6800DTR2 can be used for a variety of applications. In communications systems, it can be used to switch between two sets of data signals and to synchronize data transfer. It can also be used in control systems to decode a binary value and to generate a control signal based on the value. In digital logic circuits, it can be used to multiplex or demultiplex data signals.The 74FST6800DTR2 has two four-bit data inputs (D1 and D2) and two four-bit output lines (A and B). It also has two enable inputs (E1 and E2) which control whether the data inputs or outputs are enabled. The two enable inputs (E1 and E2) must be in the opposite states in order for data transfer to occur. If E1 is high and E2 is low, then the data inputs will be enabled and data will be shifted into the register file on the positive-going edge of the clock. If E1 is low and E2 is high, then the data will be transferred from the register file to the outputs on the positive-going edge of the clock.In addition, the 74FST6800DTR2 has a reset input which can be used to reset the register file. The reset input must be taken to a high logic level for the register to be reset.The 74FST6800DTR2 also has a built-in multiplexer/decoder circuit. The multiplexer is useful for switching between two 4-bit data signals, allowing one of the signals to be selected for output. The decoder circuit can be used to decode a 4-bit binary word, such as a 4-bit binary code from a logic circuit, and generate a control signal based on the value of the code.In summary, the 74FST6800DTR2 is a versatile logic chip that can be used to switch between two sets of data signals or to multiplex or demultiplex data signals. It can also be used as a decoder to generate control signals based on a 4-bit binary value. The dual four-bit registers and built-in multiplexer/decoder make this chip a useful tool when designing digital logic circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description