74HC238D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74HC238D is part of the 74HCxx range of popular CMOS logic devices, and is a 3-to-8 line decoder, who\'s application field and working principle is quite specific.

Application Field

The 74HC238D logic device is most commonly found in digital designs, where there is a need to decode a digital signal with up to eight inputs into one output. This might typically include designs where an individual data bus needs to route data from one microcontroller to another, or ultra-high-speed digital designs which require a very rapid signal decoding process.

Working Principle

The 74HC238D is a 3-line to 8-line decoder, which is based upon a 74HC138 decoder. An input is set when binary inputs A, B and C are fed in, in parallel. The input subsequently addresses an 8-line output where one single output will be set, while all other outputs remain at zero level. The device is able to segment an 8 data-bus line into 8 independently addressable TTL output. This is configured utilizing programmable logic gates and conductive combinational logic.

The 3 input lines in the 74HC238D are referred to as A, B, and C*. The output lines of the 74HC238D are referred to as Y0 through Y7. When A, B, and C* are set to Low (logic 0) all the outputs will be set to Low. As the inputs are transitioned from Low to High then the output lines follow in a binary fashion until all the output lines are set to High.

The 74HC238D can operate between a supply voltage of 1.65 to 5.5V, and its maximum operating speed is 10MHz. To use this logic device in a circuit, it is necessary to have 3 resistors in series with each input, and the outputs need to be pulled-down through resistors connected to ground. This will ensure proper operation of the 74HC238D.

The 74HC238D is one of the most widely used 3>8 line decoders in digital electronics, due to its simplicity, robustness and cost. Its ability to address 8 distinct outputs enables a wide range of applications, making it an invaluable tool in logic design.

The specific data is subject to PDF, and the above content is for reference