74OL6001S

Data Rate:	15MBd
Supplier Device Package:	6-SMD
Package / Case:	6-SMD, Gull Wing
Mounting Type:	Surface Mount
Operating Temperature:	0°C ~ 70°C
Voltage - Supply:	4.5 V ~ 5.5 V
Current - DC Forward (If) (Max):	--
Voltage - Forward (Vf) (Typ):	--
Rise / Fall Time (Typ):	45ns, 5ns
Propagation Delay tpLH / tpHL (Max):	100ns, 100ns
Series:	OPTOLOGIC™
Current - Output / Channel:	40mA
Output Type:	Push-Pull, Totem Pole
Input Type:	Logic
Common Mode Transient Immunity (Min):	5kV/µs
Voltage - Isolation:	5300Vrms
Inputs - Side 1/Side 2:	1/0
Number of Channels:	1
Part Status:	Obsolete
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The 74OL6001S is a type of logic output optoisolator used primarily in the control and automation spheres. It is used widely as an isolation switch for eliminating electrical interference when connecting two circuits together. This device can be used in a wide variety of applications, ranging from basic logic switching to high-speed communication.The 74OL6001S is a compact, low-profile, two-pin device that offers excellent signal integrity and reliable 40 mA output current. It is suitable for use with variety of logic devices, such as digital relays and timers, motor speed controllers, and sensor threshold controllers.

Applications.

The 74OL6001S is ideally suited for controlling the switching of digital relays and timers, motor speed controllers, and sensor threshold controllers. It also can be used in high speed communications, laser pulse detectors, and in digital sensors. In addition, the 74OL6001S is capable of providing isolation between two systems for greater reliability and noise reduction.The 74OL6001S is frequently used in the automation industry. It is ideal for controlling the switching of digital relays and timers, and motor speed controllers. It is also used to provide isolation between two systems for greater reliability and noise reduction.

Working Principle

The 74OL6001S utilizes a phototransistor, an electronic switch which is activated when a light is shined upon it. This type of optoisolator is ideal for use in digital systems, since the on-off state can be changed from a light emitting diode (LED) to a phototransistor with the proper electrical input.Specifically, this is achieved by turning an LED on and off, which then causes the phototransistor to turn on and off. Therefore, when the LED is turned on, the phototransistor is activated, allowing the voltage to flow through the circuit. This enables the connected devices to communicate with one another, enabling the desired signal to be sent across the circuit. The LED is then turned off, which in turn turns off the phototransistor, thereby stopping the flow of current and signaling the end of the communication.

Conclusion

The 74OL6001S is a logic output optoisolator designed to provide a high degree of isolation between digital systems. It is ideal for applications where noise reduction and reliable signal integrity are needed. The device works by turning an LED on and off, which then causes a phototransistor to turn on and off. This enables the necessary signals to be sent across the circuit and for communication to occur between two connected systems. The 74OL6001S can be used for a variety of applications, including digital relays and timers, motor speed controllers, and sensor threshold controllers, and is frequently used in the automation sector.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description