74OL6010SD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Logic Output are a type of optical-electrical isolators used for electric isolation and safety purposes. In electronic equipment, these electrical isolators are used for digital logic signals or for controlling the flow of electricity. The 74OL6010SD is one such type of logicOutput Optoisolator. It is a 6-pin photocoupler with a very compact package.

The 74OL6010SD is a surface-mount type Optoisolator designed for automatic mounting and pick-and-place processes. It has an ESD rating of 8KV and a creepage distance of 8 mm. The 74OL6010SD has a dielectric strength of 5KV RMS for one minute. Its small size makes it ideal for use in a variety of applications.

The 74OL6010SD is typically used to interface logic signals wiring between systems without intervening conductive paths. It uses an optically coupled silicon photo detector and a drive transistor to isolate the control circuit from the load. It is particularly well suited for transmission data signals between different systems that require optical isolation.

The 74OL6010SD has an integrated blue LED that pulses when an input voltage is applied. The LED emits light that is received by a photodetector and generates a voltage that drives the output transistor, thus allowing for data transmission between devices without direct electrical connections.

The 74OL6010SD works in two operating modes. In the normal mode, the LED is off when no input is applied and the output transistor is off. When the input voltage is applied, the LED emits light, and the output transistor turns on to supply the load. In the inverted mode, the output is opposite: the LED is on when no input is applied, and it turns off when the input voltage is applied.

The 74OL6010SD is used in a variety of electronic applications such as communications, industrial control, medical electronics, automotive, and power supplies. It is ideal for applications that require data transmission between different systems without direct electrical connections. It can offer significantly improved EMI performance when used with ground shield wiring.

In summary, the 74OL6010SD is an Optoisolator - Logic Output that is used for electric isolation and safety in a variety of electronic applications. It works by using an isolated LED and photodetector to connect two systems without intervening conductive paths. It is small and compact, enabling it to be used in a variety of applications, and has an ESD rating of 8KV and a dielectric strength of 5KV RMS for one minute.

The specific data is subject to PDF, and the above content is for reference