74OL6001W

Data Rate:	15MBd
Supplier Device Package:	6-DIP
Package / Case:	6-DIP (0.400", 10.16mm)
Mounting Type:	Through Hole
Operating Temperature:	0°C ~ 70°C
Voltage - Supply:	4.5 V ~ 5.5 V
Current - DC Forward (If) (Max):	--
Voltage - Forward (Vf) (Typ):	--
Rise / Fall Time (Typ):	45ns, 5ns
Propagation Delay tpLH / tpHL (Max):	100ns, 100ns
Series:	OPTOLOGIC™
Current - Output / Channel:	40mA
Output Type:	Push-Pull, Totem Pole
Input Type:	Logic
Common Mode Transient Immunity (Min):	5kV/µs
Voltage - Isolation:	5300Vrms
Inputs - Side 1/Side 2:	1/0
Number of Channels:	1
Part Status:	Obsolete
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

74OL6001W Application Field and Working PrincipleOptoisolators - Logic Output optoisolators are used to provide coupling between digital input signals and the control electronics. The 74OL6001W optoisolator is an advanced solution for rapidly converting digital logical signals into electrical isolation by using emission and detection of infrared light.This device, when used in an electronic system, prevents high or low voltages from damaging the sensitive or logic devices. This is ideally suited for applications where power is taken from a variety of sources, such as multiple batteries, and needs to be isolated from the logic circuitry of the system.Application FieldsFor digital communication systems, the 74OL6001W has several advantages. It can provide a simple, efficient, and reliable way of achieving isolation between multiple interfaces, while still passing logic data reliably. The device is particularly useful for applications that require noise-free digital communication. It is well suited for applications in communications networks and other digital systems, particularly where there is a potential for imminent danger. By providing electrical isolation between systems, it prevents current from passing between two systems. In addition, the device is also used for applications such as airbag systems, remote control systems, and automation equipment.Working PrincipleThe primary of the 74OL6001W optoisolator consists of an infrared emitting diode (LED) and a photo detector, usually a photodiode or phototransistor. The voltage applied across the LED generates an infrared light beam which is detected by the photodiode or photo transistor. This enables an isolated electrical circuit to respond to a digital signal. The power supply of the device is electrically isolated from the output, so that the voltage and current levels of the output are determined by the input signal. The state of the output can be in either high (1) or low (0) logic states. The output can be either in a direct or inverted form. The maximum current of the output is determined by the current drawn from the power supply. For the 74OL6001W the output current is rated at 25mA while the supply current ranges from 100mA to 600mA.ConclusionThe 74OL6001W optoisolator is a reliable and efficient solution for transforming digital logic signals into electrical isolation. It can provide an effective and isolated medium for digital communication and signal isolation between systems, and can be employed in applications such as airbag systems, remote control systems, and automation equipment.The device utilizes an LED and a photodetector, such as a photodiode or phototransistor, to detect an infrared light beam and convert it to an electrical isolation. The output current of the device is rated at 25mA while the supply current ranges from 100mA to 600mA. Thus, the 74OL6001W optoisolator is ideal for applications where an isolated medium is needed for digital communication.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description