80D681P200MD2DE3

The 80D681P200MD2DE3 aluminum electrolytic capacitors are designed for general-purpose applications. These capacitors are radial-leaded variants, which means that they are designed to be mounted on circuit boards with their leads protruding out from either side. This type of capacitor is considered to be very reliable, has a very low equivalent series resistance (ESR), and is also available in a wide variety of capacitance values.In terms of how these capacitors actually work, when an electric current flows between the two aluminum plates, an electric field is created that causes ions in the electrolyte to become charged. This ionic charge forms the capacitance of the capacitor, which, in turn, allows the capacitor to store electrical energy. When the current is removed, the energized ions in the electrolyte will become neutral again, thus releasing the stored electrical energy and discharging the capacitor.The 80D681P200MD2DE3 capacitors are rated for a rated ripple current of 0.2 Amp. This is the maximum current that the capacitor can handle, and it is the current that the capacitor should be capable of sustaining during peak load conditions. It is important to note that the ripple current rating is typically higher than the continuous DC current rating, as the ripple current rating is designed to better withstand frequent fluctuations in current that could be caused by surges or transients.The 80D681P200MD2DE3 capacitors are also rated for a nominal capacitance of 680 microfarads (uF). This is the amount of electrical energy that the capacitor can store. Typically, the higher the capacitance, the more energy is stored and the more efficient the capacitor is at handling changes in current. The maximum voltage rating for these capacitors is 200 VDC. This is the maximum amount of voltage that the capacitor can handle before it short-circuits or. fails. It is important to note that if the voltage rating is exceeded, the capacitor can fail and potentially cause hazardous conditions or damage the device in which it is used. In addition to all this, the 80D681P200MD2DE3 capacitors have a lifetime rating of 2000 hours, meaning that these capacitors are designed to be reliable during the typical lifetime of a device.

The specific data is subject to PDF, and the above content is for reference