81505231

Connection Method:	--
Weight:	0.408 lb (185.07g)
Approvals:	ATEX
Mechanical Life:	3,000,000 Cycles
Operating Temperature:	-5°C ~ 50°C
Ingress Protection:	--
Features:	--
Mounting Type:	Sub-Base Mount
For Use With/Related Products:	--
Series:	--
Fluid Type:	Air, Inert Gas
Orifice Diameter:	0.098" (2.50mm)
Operating Pressure:	30 ~ 116 PSI (2 ~ 8 bar)
Actuator Type:	--
Function:	Negative Output
Type:	Amplifier Relay
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pneumatics

Pneumatics is a technology area that deals with the manipulation and control of air pressure to operate valves and other devices. Common applications of pneumatics include powering industrial process control systems, controlling valve actuators, and controlling linear actuators and other motorized devices. Pneumatic components, such as cylinders, tubing, and control valves, are typically used to control compressed air to power a device in a desired direction or motion.The key principles of pneumatics are based on the principles of Pascal’s law. Pascal’s law states that when pressure is applied to any part of a closed system of fluids, the pressure will be transmitted equally throughout the entire system. This means that when pressure is applied at one point in a tubing system, the same pressure will be transmitted to all other points in the system. This allows pneumatic systems to effectively transmit and guide air through high-pressure and low-pressure systems.In pneumatic systems, air is typically generated through a compressor, and then it is regulated and distributed through a central controller. The air is then combined with other elements, such as solenoids, valves, and sensors, to control the operation of the system. The air pressure is then used to activate mechanized components to perform the desired action.

Hydraulics

Hydraulics is a technology area that focuses on the manipulation and control of fluids, typically oil and/or water, to move cylinders, pumps, and other parts of industrial machines. Hydraulics components, such as rams, actuators, and pumps, are used to control the flow of oil or water to power the machines in a desired direction or motion.The key principles of hydraulics are based on the principles of Pascal’s law. This law states that when pressure is applied to any part of a closed system of fluids, the pressure will be transmitted equally throughout the entire system. This same principle of Pascal’s law is used in a hydraulic system. When pressure is applied to oil, forced through a hydraulic cylinder or ram, the same pressure is transmitted throughout the entire system and used to operate other hydraulic components, such as valves and motors.In a hydraulic system, a pump is used to generate and regulate the pressure of the oil. The pump is operated through a system of levers and valves, and it is typically controlled by a solenoid. The oil is then regulated and guided through a manifold to other parts of the system. The manifold is responsible for controlling the pressure and flow of the oil. Once the oil reaches the desired part of the system, it will be used to move or activate the mechanized components.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description