861141486020

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are widely used in electronic circuits. These capacitors primarily consist of an aluminium oxide layer and two parallel aluminium electrodes, forming an electrolyte sandwich between them. These capacitors have a large capacitance because the oxide layer acts as a dielectric. They have the highest capacitance per unit volume.

The part number 861141486020 is an aluminum electrolytic capacitor. It has a rated temperature range of -40 to +100 degrees celsius. The capacitance value of this capacitor is 6.3µF, the tolerance is ±20%, and the maximum operating voltage is 25 VDC. The capacitance does not change significantly with increasing or decreasing applied voltages.

Aluminum electrolytic capacitors are used in a wide range of applications, including filtering, decoupling, delaying, and rectification. They are often used in electrical circuits that require high capacitance values and low reactance, making them ideal for audio and frequency-dependent circuits.

In filtering applications, aluminum electrolytic capacitors block unwanted alternating current, while allowing direct current to pass. This is usually accomplished by connecting an electrolytic capacitor in series with a resistor, forming a low-pass filter. This type of filter effectively blocks signals with frequencies above a certain level.

Decoupling applications involve the use of electrolytic capacitors to decouple a circuit from an external power source, preventing voltage fluctuations from propagating through the circuit. This is usually accomplished by connecting multiple capacitors in parallel, forming a high-pass filter. This type of filter effectively blocks signals with frequencies below a certain level.

Delaying applications involve the use of electrolytic capacitors to act as a timing element, delaying the incoming signals from a power source. This is usually accomplished by connecting the capacitor in series with a resistor, forming a RC (resistor-capacitor) circuit. When a voltage is applied to this circuit, the capacitor charges up and the resistance prevents the capacitor from discharging immediately. Thus, the delay is created between the application of the voltage and the discharge of the capacitor.

Finally, rectification applications involve the use of aluminum electrolytic capacitors to rectify alternating current, converting it to direct current. This is usually accomplished by connecting the capacitor in series with a diode and a resistor, forming a full-wave rectifier circuit. When an alternating current is applied to this circuit, the diode and the capacitor act together to convert the alternating current to direct current.

In conclusion, the 861141486020 aluminum electrolytic capacitor is a versatile component for a wide range of applications. Its high capacitance and low reactance values make it an ideal choice for filtering, decoupling, delaying, and rectification applications. Its rated temperature range and maximum operating voltage make it well suited for use in electrical circuits.

The specific data is subject to PDF, and the above content is for reference