93C86CT-I/MC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 93C86CT-I/MC is a white-label (non-manufacturer specific) serial presence detect (SPD) EEPROM. This EEPROM is integrated into the memory module to manually store settings and the memory module’s identifying information. The 93C86CT-I/MC is static RAM with a 16-bit address bus and 256-word organization. It stores a 128-word parameter table that is used to define and detect the memory module’s chip densities, type, and other system settings.

The 93C86CT-I/MC uses a three-wire serial interface protocol for communication, which features clock plus two data I/O pins. It is compatible with System Management Mode (SMM) and 60-pin dual in-line memory module (DIMM) signals. The device has two memory regions protected by an asynchronous hardware set/reset (H UART).

The 93C86CT-I/MC supports an industry-standard serial presence-detect (SPDR) protocol. This protocol is designed to detect the presence of, and to configure the operating parameters of, dynamic random-access memory (DRAM) modules. The SPDR register holds information such as the memory module’s type, size, speed, and configuration. The 93C86CT-I/MC supports the use of extended SPD registers for additional features.

The 93C86CT-I/MC is a non-volatile serial EEPROM memory device. It is used in various applications such as the storage of memory module configuration information in computer systems. This device supports the most commonly used Data Storage, Transfer, EEPROM, and Serial Peripheral Interface (SPI) ICs. Some applications include reading memory module configuration parameters, computer BIOS store, board ID, and device serial numbers.

The 93C86CT-I/MC has an 8-bit instruction set and a 3-pin Serial Peripheral Interface (SPI) for data input/output. It has an 8-bit program execution time of up to 50MHz and an operating temperature range of -40°C to +125°C (-40°F to +257°F). This EEPROM also has an erase and write cycle endurance of up to 1 million erase/write cycles, 2 million address cycles and 4 million read cycles.

The 93C86CT-I/MC is manufactured using a high-reliability CMOS fabrication process and has three different modes of operation; Standby mode, Programming Mode and Reading Mode. Standby mode is enabled by the user and is used to reduce power consumption. Programming mode is used to write data to the 93C86CT-I/MC while in reading mode data is retrieved from the device. The 93C86CT-I/MC is designed to reduce the read/write cycle time of the Silicon RAM and allow larger memory capacities to be used.

The 93C86CT-I/MC can be used in a variety of applications, such as for embedded computing, automotive, consumer electronics, industrial, networking and medical. It is used for programmable memory storage, as well as for tracking system performance. It also provides a reliable data storage and retrieval solution for point-of-sale (POS) systems and automated teller machines (ATMs).

In summary, the 93C86CT-I/MC is a static RAM integrated EEPROM with a 3-wire interface protocol for communication. It is used to store the memory module’s parameters and other settings, as well as for tracking system performance. The device supports an industry standard serial presence-detect (SPDR) protocol and can be used in various applications. It is manufactured using a high-reliability CMOS fabrication process with an erase and write cycle endurance of up to 1 million erase/write cycles, 2 million address cycles and 4 million read cycles, making it a reliable and efficient memory solution.

The specific data is subject to PDF, and the above content is for reference