93C86A-I/MS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 93C86A-I/MS is a type of Memory from Microchip. This Memory is an 8-pin serial electrically-erasable programmable read-only memory (EEPROM). It is manufactured using a 0.6 micron CMOS technology for higher reliability and lower power operation. This memory also features write protection by the user.

The 93C86A-I/MS can be used in a variety of applications, including automotive, consumer products, instrumentation, medical applications, and industrial control. This memory is specifically designed to provide nonvolatile data storage with a superior write/erase endurance. It also offers high-speed programming and fast data access times. This product can operate with a range of supply voltages, including +3 V, and features very low active power consumption.

The 93C86A-I/MS consists of an 8-bit wide, 128-bit electrically erasable and programmable read-only memory cell array organized as 16 words of 8 bits each. Data is written and read from the memory through an 8-bit data bus and 3-bit address bus.

The fundamental mode of operation of the 93C86A-I/MS is serial programming and verification, which is initiated and controlled by the master logic device, usually a microcontroller. The memory can be programmed at 10MHz allowing rapid save and recall of data. Its programming and erase cycle is achieved in 10uS and the datasheet guarantees an endurance of 104 cycles.

The 93C86A-I/MS also includes an integrated write protection scheme that prevents unintentional writes or erasing of the program memory and requires a simple three-wire interface. This device also includes an internal memory map to default all program memory locations, providing additional protection from unintentional programming or erasing of the data. The 93C86A-I/MS is specifically designed for applications that require reliable, non-volatile data storage.

The 93C86A-I/MS is available in various configurations, making it suitable for a variety of applications. It comes with a OTP (one-time-programmable) and EDP (electronically-erasable-programmable) versions, as well as other memory densities. The OTP version is ideal for applications that require read-only operations and the EDP version provides flexibility and cost savings through reprogramming.

The 93C86A-I/MS offers a wide array of features that make it an ideal choice for use in embedded industrial, instrumentation and medical applications. Its low-power consumption and high reliability ensure reliable data storage and make it a cost-effective solution for end equipment.

The specific data is subject to PDF, and the above content is for reference