93LC76C/S15K

Series:	--
Packaging:	Tray
Part Status:	Active
Memory Type:	Non-Volatile
Memory Format:	EEPROM
Technology:	EEPROM
Memory Size:	8Kb (1K x 8, 512 x 16)
Clock Frequency:	3MHz
Write Cycle Time - Word, Page:	5ms
Memory Interface:	SPI
Voltage - Supply:	2.5 V ~ 5.5 V
Operating Temperature:	0°C ~ 70°C (TA)
Mounting Type:	Surface Mount
Package / Case:	Die
Supplier Device Package:	Die

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The 93LC76C/S15K is an electrically erasable programmable memory (EEPROM) chip developed by Microwire, a division of Microchip Technologies. It is extremely low-power, low-cost, and provides high-speed communication capabilities. The 93LC76C/S15K is commonly used for small-scale data storage. This chip is capable of storing up to 2Kbits of data, which is enough for a small amount of program code or data.

Application Field

The primary application field of the 93LC76C/S15K is data storage. This EEPROM is well-suited for storing code, data, and configuration information in embedded control applications. Due to its low-power consumption, fast read/write speeds, and low-rise time, it can be used as a non-volatile memory alternative in embedded systems. The chip is also commonly used to store settings and profiles in smart home applications such as lighting and heating controllers. The 93LC76C/S15K can also be used for authentication and security applications. This chip is capable of storing unique identifiers, encryption keys, and access control codes. In addition, the chip can securely store and authenticate biometric data. This makes it well-suited for use in access control systems and security systems such as fingerprint door locks and card access systems.

The Working Principle

The 93LC76C/S15K chip is based on Microwire\'s advanced proprietary architecture. The chip\'s logic is divided into four blocks, including an address register, data register, feed controller, and control logic. The chip\'s internal registers are 16-bits wide and are used to store data and control information. The chip\'s address register is used to store the memory location of the data that the chip is currently accessing. The chip\'s data register stores the data being written to or read from the memory. The feed controller is responsible for performing the operations that access the data stored in the chip, including write, read, and erase operations. The control logic section is responsible for controlling the chip\'s operation, including instruction decoding and control signal generation. The 93LC76C/S15K uses the Microwire Bus Protocol to communicate with the associated host device. The protocol is a 3-wire serial protocol that allows for the chip to be controlled and data to be sent to and from the chip at speeds up to 10M bits/second.

Conclusion

The 93LC76C/S15K is a low-cost, low-power, and high-speed EEPROM chip developed by Microwire. The chip is commonly used in small-scale data storage, authentication and security applications, and embedded control systems. The 93LC76C/S15K is based on Microwire\'s proprietary architecture, and uses the Microwire Bus Protocol for communication with a host device.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description