A170PB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A170PB is a single diode rectifier, application for pre-charge, bypass and snubber circuits, surge and EMI suppression, and high frequency switch mode power supplies. The single rectifier features a low forward voltage drop, low reverse leakage current, and soft-recovery characteristics. Due to these advantages, A170PB diodes are widely used in switching power supplies and high-frequency (RF) rectifiers, which require a low-impedance path for the high frequency component of the circuit.

A170PB diodes are made of a semiconductor material such as silicon. When the anode is positive with respect to the cathode, the material will conduct and allow current to flow through it. The anode is connected to the positive voltage, while the cathode is connected to the negative voltage. As the name implies, the forward voltage drop across the diode is small, typically around 0.7 V.

The A170PB diodes also have a low reverse leakage current. This is the current that flows from the anode to the cathode when the voltage across the diode is reversed. The maximum reverse leakage current for A170PB diodes is usually 4 μA at 25°C. This is much lower than the forward current rating of 1A.

When the diode is switched off, the current drops off rapidly and the diode recovers quickly. This feature of the A170PB diodes allows them to be used in applications where fast switching of power is required, such as in switching power supplies, where the diode needs to be switched off and on quickly in order to regulate the power supply output voltage.

In addition, the A170PB diodes are also used in electromagnetic interference (EMI) and radio frequency (RF) suppression circuits. The low reverse leakage current of the A170PB diodes makes them suitable for use in such circuits. They provide a low-impedance path that can block high frequency signals, thus protecting sensitive components from RF interference.

Finally, A170PB diodes can also be used in pre-charge or bypass circuits. These circuits are used to reduce the current and voltage surges which can occur when power is applied to a load, such as a motor. The A170PB diodes are used in these circuits to provide a low-impedance path during the power-up process, thus minimizing the voltage surge and protecting the load.

In summary, A170PB is a single diode rectifier, which is widely used in a variety of applications due to its low forward voltage drop, low reverse leakage current, and soft-recovery characteristics. It is suitable for use in switching power supplies and high-frequency (RF) applications, electromagnetic interference (EMI) and radio frequency (RF) suppression, and precharge and bypass circuits.

The specific data is subject to PDF, and the above content is for reference