ACH3218-101-TD01 Filters

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) filters are used to reduce the amount of EMI and RFI present in electrical and electronic circuits. The most common type of filter employed for these purposes is the LC (inductor-capacitor) filter, but RC (resistor-capacitor) and LC networks are also used.

The ACH3218-101-TD01 is a combined EMI/RFI filter that provides improved performance in EMI/RFI interference suppression applications. It features two LC closed-loop circuits that are connected in series and operated at 450 kHz. It is designed for use in a variety of industrial and consumer applications, including radios, audio equipment, and computers.

The ACH3218-101-TD01 filter works by forming a shield between the source of interference and the sensitive circuitry. It functions by reflecting some of the EMI/RFI energy away from the sensitive circuit; this is known as reflective interference suppression. The filter also attenuates the remaining EMI/RFI energy that penetrates the shield, reducing the amplitude of the signals to a safe level.

To form the shield, the filter utilizes two LC closed-loop circuits, one after the other. The first LC circuit is comprised of an inductor and a capacitor connected in series, and the second LC circuit is often referred to as a “stub” circuit and consists of an inductor and capacitor connected in parallel. When signals of EMI or RFI are incident on the filter, the inductor of the first LC circuit absorbs a portion of the energy, while the capacitor of the same circuit reflects the remaining energy. The reflected energy is then further absorbed by the stub circuit\'s inductor,the remaining energy is attenuated by the capacitor of the same circuit.

The total EMI/RFI suppression effect of the ACH3218-101-TD01 filter is determined by its LM and CM frequency response characteristics. LM stands for Legnth of Member, which is a measure of the suppression effect at low frequencies, while CM stands for Capacitance of Member, which is a measure of the suppression effect at higher frequencies. The filter has a very broad frequency response that covers a wide range of frequencies from 10kHz – 10GHz.

The ACH3218-101-TD01 filter is designed to offer the best possible suppression of EMI/RFI energy in various applications. It is suitable for use in industrial and consumer application environments where EMI/RFI interference may cause a nuisance or even be hazardous. Thanks to its balanced frequency response, the filter will effectively attenuate or eliminate EMI/RFI noise over wide frequency ranges, and it is even capable of protecting sensitive circuitry over extended temperatures and high voltages. The filter is available in a wide range of sizes and configurations, making it suitable for most application requirements.

Overall, the ACH3218-101-TD01 filter is an excellent solution for EMI/RFI interference suppression. Its design makes it suitable for use in a wide range of applications, and its broad frequency response ensures effective protection and performance over a wide range of conditions. It is an ideal filter for most industrial and consumer equipment, and will ensure the best possible results in terms of EMI/RFI noise reduction.

The specific data is subject to PDF, and the above content is for reference