ACH32C-102-TL001

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Electro Magnetic Interference (EMI) and Radio Frequency Interference (RFI) Filters are a key component in the design of any electronic device. The most common type of these filters are the LC (inductance-capacitance) and RC (resistance-capacitance) networks. One such EMI/RFI filter is the ACH32C-102-TL001.

The ACH32C-102-TL001 is a low pass EMI filter that is designed to reduce or eliminate all frequencies higher than its designated filter level, while allowing frequencies lower than the designated filter level to pass through. This type of filter is commonly found in military and aerospace applications where electromagnetic and radio frequency interference (EMI/RFI) must be contained and controlled. This filter is also suitable for any general electronic equipment and is available in both single- and dual-pole configurations.

The ACH32C-102-TL001 is made up of two series-connected inductors (L1 and L2), two series-connected capacitors (C1 and C2), and one additional resistance (R). The inductors and capacitors form an LC series network, while the resistor forms an RC (resistive-capacitive) series network. The resistance of the capacitor is determined by the filter level frequency and the inductance of the inductor by the inductance value.

When an input signal is applied to the ACH32C-102-TL001, the capacitor passes all low frequency signals while the inductor reduces all higher frequencies. The effect of the combined inductive-capacitive (LC) and resistive-capacitive (RC) networks is to produce a low-pass filter. The filter level frequency is then determined by the values of the inductor and capacitor.

In addition to its EMI/RFI filtering characteristics, the ACH32C-102-TL001 also provides ESD and surge protection. This filter is designed to redirect any high current/voltage surges and ESD pulses away from valuable equipment so that it can function effectively. It also reduces noise, momentarily-induced by power line surges.

The ACH32C-102-TL001 is designed for a variety of applications, including commercial, industrial and military. It offers low insertion loss while still providing excellent EMI/RFI performance and ESD/surge protection. This filter is a cost effective and reliable solution for most EMI/RFI filtering needs.

In conclusion, the ACH32C-102-TL001 is a low pass EMI filter that combines an LC and RC network to provide effective EMI/RFI filtering performance for commercial, industrial, and military applications. This filter is designed to provide effective attenuation for all frequencies higher than its designated filter level, while at the same time providing ESD/surge protection and low insertion loss.

The specific data is subject to PDF, and the above content is for reference