AD5689RARUZ-RL7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The AD5689RARUZ-RL7 is a digital to analog converter used for data acquisition. It is among the many chips sometimes used for this purpose known as DACs. This application field and its inherent working principle will be discussed in this article.

DACs fall under a larger category related to data acquisition, which is the process by which physical phenomena are sensed and then recorded. With DACs, a digital signal is first converted into an analog signal, enabling the interface between the two. Once the signal is analog, the information can be sampled and held for processing or reproduction. It is thus useful for applications where a conversion from digital to analog is required, such as in engineering, protocols, and electronics.

The AD5689RARUZ-RL7 is a 16-bit DAC housed in a 28-pin TSSOP package. It has a supply voltage range of 2.7V to 5.25V, a typical operating current of 1mA, and a maximum offset voltage of 0.25mV. Its power consumption is low, saving energy while running. This DAC has a slew rate of 2800V/s, and a settling time of 13l s.

The AD5689RARUZ-RL7 works based on a reference voltage and its output signal is driven by a R-2R current-steering circuit. It uses an internal voltage reference generator to program its reference voltage, which determines the operational range of voltages. The reference voltage range is from 0V to 4.096V, and is the ultimate factor that determines the actual output voltage. It is possible to adjust the reference voltage external to the DAC for greater flexibility in programming desired voltages.

The AD5689RARUZ-RL7 also offers several features including a latch current output buffer, a low-glitch power-on reset, and a temperature range extending from -55C to 125C. As the digital input and reference voltage parameters are buffered on-chip, there is less interference. This chip also has an integrated CMOS operational amplifier which allows it to support low-power applications. Additionally, it offers several digital functions such as clear and power-on reset.

In conclusion, the AD5689RARUZ-RL7 is a digital to analog converter used for data acquisition. It operates based on an input digital signal, which is converted into an analog signal using a reference voltage generated internally. It is a low-power chip, boasting a low operating current and minimal offset voltage. The slew rate is high, allowing for fast settling. This DAC provides features such as a latch current output buffer, a CMOS operational amplifier, and clear and power-on reset functions. Thus, it can be used for applications requiring conversion from digital to analog.

The specific data is subject to PDF, and the above content is for reference