AD633JR-REEL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Analog multipliers, dividers and similar signal processing operations are some of the most fundamental tools used by electrical engineers. One of the oldest and most widely used linear analog multipliers is the AD633JR-REEL. This device has been around for over 30 years and is still used for a variety of signal processing tasks today.

The AD633JR-REEL is a voltage-mode multiplier capable of multiplying two input signals, X and Y. This device can perform multiplication, division, gating, and summation functions depending on how it is wired. The device has four terminals labeled X, Y, Vcc and GND. The X and Y terminals are used to input the two signals that will be multiplied. The Vcc terminal is the power supply voltage, which is usually set to 5 Volts. The GND terminal is the ground reference voltage.

The two inputs, X and Y, are then multiplied by a set of switches and internal resistors. These switches control the resistance of each side of the multiplier, resulting in an output voltage that is the product of the two input signals. The output of the multiplier is a voltage that is proportional to the two inputs. This voltage can then be used for further signal processing or for controlling other elements such as servos, motors, or relays.

The AD633JR-REEL can also be used as a dividing circuit by reversing the input signals. In this case, the output voltage is equal to the quotient of the two inputs. For example, if we had two input signals of 10 Volts and 5 Volts, the output voltage of the multiplier would be 2 Volts.

The AD633JR-REEL can also be used for gating functions by using one of inputs as a gate signal. This gate signal controls the output of the multiplier by allowing or blocking the two inputs. For example, if one of the two inputs is set to 0 Volts, the output will be 0 Volts regardless of the value of the other input.

The AD633JR-REEL can also be used as a summation circuit by setting both inputs to the same value. In this configuration, the output voltage will be twice the value of the input signal. For example, if we had two input signals of 5 Volts each, the output voltage would be 10 Volts.

The AD633JR-REEL provides a versatile and compact solution for linear analog multiplier, divider, gating, and summation functions. It is a reliable and easy-to-use device that is perfect for a variety of signal processing applications. The device is also easy to implement and configure, making it suitable for both amateur and professional projects.

The specific data is subject to PDF, and the above content is for reference