AD8341ACPZ-WP

Series:	--
Packaging:	Tray
Part Status:	Discontinued at Digi-Key
Function:	Vector, Modulator
LO Frequency:	1.5GHz ~ 2.4GHz
RF Frequency:	1.5GHz ~ 2.4GHz
P1dB:	8.5dBm
Noise Floor:	-150.5dBm/Hz
Output Power:	--
Current - Supply:	145mA
Voltage - Supply:	4.75 V ~ 5.25 V
Test Frequency:	1.9GHz
Package / Case:	24-VFQFN Exposed Pad, CSP
Base Part Number:	AD8341

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF modulators

RF modulators are parts used to convert signals from one format to another, allowing for communication between different types of devices. RF modulators are usually employed in radio-frequency communications, in which two or more pieces of equipment share a signal, often embedded in a carrier signal. This type of modulator is typically used to combine video signals and audio signals. One of the most common and heavily used RF modulator is the AD8341ACPZ-WP.

AD8341ACPZ-WP Application Fields

AD8341ACPZ-WP is a low-cost, high-performance RF modulator. It is widely used in many industries, such as industrial, medical, consumer electronics, automotive, aerospace, and communications systems. It has the following features: • Low noise figure • Low power • Low distortion • High linearity • High gain • Wide dynamic rangeThese features make the AD8341ACPZ-WP a perfect choice for a variety of applications.• Industrial – The modulator can be used in industrial control systems, such as controlling motor speed or temperature.• Medical – The modulator can be used in medical equipment, such as MRI or nuclear imaging systems. • Consumer electronics – The modulator can be used in consumer electronics, such as TVs or media players. • Automotive – The modulator can be used in automotive systems, such as car entertainment systems. • Aerospace – The modulator can be used in aircrafts, such as radar systems. • Communications systems – The modulator can be used in communication systems, such as wireless network routers or cellular base stations.

AD8341ACPZ-WP Working Principle

The AD8341ACPZ-WP modulator is an analog direct-conversion RF modulator, which converts an input signal directly to an output signal without the need for filters or other additional components. It converts the amplified input signal to a suitable output signal for transmission over a wide frequency range, from about 500 MHz to 2.4 GHz.The modulator operates in two stages: the first being the amplifier and second being the modulator. The amplifier section consists of transconductance and transconductance cascode stages, which are used to amplify the signal. The second stage is the modulator, which is used to convert the amplified signal into an output signal. The modulator can work in two different modes: an amplitude modulation (AM) mode or a pulse width modulation (PWM) mode.In AM mode, the modulator works by modulating the amplitude of the carrier wave. This is done by rectifying the input signal and then scaling it such that its output amplitude matches that of the low frequency radio signal. This modulation process allows the transmission of low frequency information over a higher frequency via a carrier wave.In PWM mode, the modulator works by modulating the pulse width (or duty cycle) of the carrier wave. This modulation allows the transmission of low frequency information over a higher frequency via a carrier wave. The input signal is rectified and then scaled so that its output width matches that of the low frequency radio signal. This modulation process allows the transmission of low frequency information over a high frequency via a carrier wave.

Conclusion

The AD8341ACPZ-WP is a widely used, low-cost, high-performance RF modulator. This modulator can be used to convert signals from one format to another, allowing for communication between different types of devices. It can be used for a variety of applications, such as industrial control systems, medical equipment, consumer electronics, automotive systems, aerospace, and communication systems. It operates in two stages: the amplifier and modulator. The modulator can use either amplitude modulation (AM) or pulse width modulation (PWM) to convert the amplified signal into an output signal, which can then be transmitted over a wide frequency range.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description