AD9516-0BCPZ-REEL7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AD9516-0BCPZ-REEL7 is a clock/timing device that falls into the category of clock generators, PLLs, and frequency synthesizers. This device is designed to provide low noise, extremely low jitter clock signal synthesis and distribution, specifically in the frequency bandwidth range of 19.44 MHz to 2.5 GHz. The advantage of using this clock/timing device is that it gives the user wide reconfigurability with many output frequencies and a very low noise level. Additionally, the AD9516-0BCPZ-REEL7 has the ability to monitor the input power supply and other internal temperatures using the on board monitoring and diagnostic functions.

The AD9516-0BCPZ-REEL7 is based on a Phase Locked Loop (PLL) architecture. Essentially, PLLs are circuits which generate a signal at a desired frequency, by locking onto an input signal at a reference frequency. As a result, the out frequency and phase of the signal is maintained, as long as the reference frequency is locked in. The input reference signal also known as the reference clock, is typically provided by an external source in the form of a quartz oscillator.

The architecture of the AD9516-0BCPZ-REEL7 is built around four major blocks: 1) the VCO, 2) the phase/frequency detector, 3) the loop filter, and 4) the programmable divider. The first block is the voltage controlled oscillator (VCO), which is essentially a digital oscillator. It is controlled by the second block, the phase/frequency detector. This block generates a control voltage based on the phase and frequency difference between the reference clock and the VCO output.

The third block, the loop filter, is designed to provide damping on the control voltage, and to reduce the effects of jitter on the VCO output. It can use a variety of different forms such as capacitors, inductors, or LC circuits. The fourth block, the programmable divider, acts as a frequency divider that is connected to the VCO output. The frequency divider is used to divide the VCO output frequency to generate a range of output frequencies.

The AD9516-0BCPZ-REEL7 is primarily used for a range of applications where low noise, precise clock synchronization is needed, such as medical and industrial. In addition, the device can be used for telecommunications, instrumentation and test equipment, and other high speed data conversion applications. Some examples of applications that the AD9516-0BCPZ-REEL7 can be used for include anti-aliasing, clock cleanup, clock/data recovery, clock regeneration, and as a clock source for many analog-to-digital or digital-to-analog converters.

In conclusion, the AD9516-0BCPZ-REEL7 is a clock/timing device that falls into the category of clock generators, PLLs, and frequency synthesizers. Its architecture is based on a Phase Locked Loop (PLL) design, and it can be used to generate low noise clock signals in the 19.44 MHz to 2.5 GHz frequency range. The device is primarily used for a range of applications where low noise, precise clock synchronization is needed, such as medical and industrial.

The specific data is subject to PDF, and the above content is for reference