AD9573ARUZ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The AD9573ARUZ application field and working principle are an important part of clock/timing—application specific fields. The AD9573ARUZ is a highly integrated, high-performance programmable clock generator that uses four 28-bit programmable divider/multiplier pairs, providing output frequencies of 80 MHz or higher. As one of the best solutions for system clock generation and distribution, it can provide its customers with excellent clock performance for system and power control. Moreover, it also has a wide range of applications in digital signal processors (DSPs), microprocessors and FPGAs.

The clock generation module of the AD9573ARUZ has four groups of 28-bit programmable divider/multiplier pairs. The output frequency of each group can be independent, and the frequency range of each output can be programmed. In addition, two independent output dividers can divide the output frequency of any of the four groups by a programmable factor of 1 to 255. There are different input frequencies, including external clock signal, ADC signal, and on-chip VCO with wide ranges of frequencies. With its external control format and internal configuration registers, the AD9573ARUZ is a powerful device for a wide range of applications where multiple independent clock require complex frequency control.

Applications of the AD9573ARUZ are highly programmable and it can be used in multi-function signal transmission and digital signal processing systems, to provide the optimum performance for signal capture and system timing. One of the most common applications of the AD9573ARUZ is as a digital signal processor (DSP) and microprocessor clock generator. it is capable of generating CCLK and DCLK clock outputs for DSPs and microprocessors. After the correct configuration and programming, the high speed differential output clock halves the required cycles when executing certain instructions. This greatly simplifies the external clock connection and reduces the circuit complexity, thus saving system power.

The working principle of the AD9573ARUQ involves the conversion of an input reference clock signal into four output clock signals, with each output having a different frequency. The input clock signal may be derived from a crystal oscillator, a sinusoidal waveform, or an external clock signal. The AD9573ARUQ also provides a wide range of programmable clock outputs, ranging from 80 MHz to 400 MHz, in both single-ended or differential mode. The single-ended or differential outputs may be driving low, medium or high fan-in devices, or can be connected to a bus line. The clock outputs can be programmed in a number of ways, including from a single input frequency, from four different input frequencies, from two different VCO frequencies, or from an external clock enable signal.

The AD9573ARUQ can output an internal voltage, with an adjustable range of 0-200 mV. This voltage may be used to control the operation of an amplifier, a series of band pass filters, or an ADC, or to configure registers or RAMs. The voltage is controlled by the internal frequency register, which can be programmed for different frequencies, up to 400MHz, in single-ended or differential mode. The register also has a configurable oscillator mode, allowing it to adjust the frequency according to external voltage or other condition.

The AD9573ARUQ is capable of providing excellent performance for clock sources and clock distributions, providing high precision, fast transition times and wide range of frequencies. It is an ideal solution for advanced digital consumer, communication, and computing applications. With the help of its many features and functions, it can provide an efficient and accurate clock distribution, with reduced system power and improved system performance.

The specific data is subject to PDF, and the above content is for reference