ADC081S101CIMFX/NOPB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ADC081S101CIMFX/NOPB is a high-performance 8-bit analog-to-digital converter, designed to provide good accuracy and low power consumption. The chip is specifically designed for low-cost, low-power applications, such as portable and battery-operated systems, that require wide dynamic range and high resolution. The ADC081S101CIMFX/NOPB is a single-channel device that can be used to convert an analog voltage into a 8-bit digital value in a wide range of operating ranges, from –25°C to +85°C.

The ADC081S101CIMFX/NOPB operates in three basic modes: single-ended conversion, differential conversion, and differential gain conversion. In single-ended conversion, the ADC081S101CIMFX/NOPB turns an analog input voltage into an 8-bit digital value. In differential conversion, the ADC081S101CIMFX/NOPB inputs two signals and then converts the difference between them into an 8-bit digital value. In differential gain conversion, the ADC081S101CIMFX/NOPB inputs two signals and then converts the ratio of their difference to the sum into an 8-bit digital value.

The ADC081S101CIMFX/NOPB features a built-in programmable gain amplifier (PGA) that enables it to process a wide range of input signals. The PGA supports gains of 1, 2, 4, or 8, allowing the input signal to span a range of up to 10 V. The converter also offers two programmable current sources for each reference input, which allows it to span a wide range of output levels, from 0.0015 μA to 10 nA. The chip also features an onboard voltage reference that provides a stable reference voltage with a temperature coefficient of ±5 ppm/°C.

The core of the ADC081S101CIMFX/NOPB is a successive approximation register (SAR) that converts analog signals into digital data. The SAR allows the device to convert an analog signal into either a single-ended or differential digital value. The SAR operates by comparing the input signal to an internal reference voltage, known as a “threshold.” If the input signal is higher than the threshold, the SAR will set the output of the ADC081S101CIMFX/NOPB to a logic “1”; if the input signal is lower than the threshold, the output will be a logic “0.” During the comparison process, the device’s PGA amplifies the signals so that the SAR can distinguish the subtle differences between them.

The ADC081S101CIMFX/NOPB is ideal for applications that require a wide dynamic range and good accuracy. It can be used in a variety of applications, such as remote medical monitoring, automotive systems, and industrial sensing. Its small size and low power consumption make it well suited for power-sensitive applications. The device’s wide range of features makes it a great choice for applications that require both wide dynamic range and good accuracy.

The specific data is subject to PDF, and the above content is for reference