ADC08D1520CIYB/NOPB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ADC08D1520CIYB/NOPB is a 16-bit data acquisition device that converts analog signals into digital signals and is primarily used in industrial applications. It is a high performance, low profile, 8-channel analog to digital converter (ADC) that samples at up to 400 kHz and has a small 3.0mm x 3.5mm form factor. Its low profile and high speed performance makes it suitable for industrial applications, including machine control, process control and factory automation.

The ADC08D1520CIYB/NOPB features a single-ended/differential input, an output data range of 8 to 16 bits, and a scan mode for continuous conversion. It operates from a single 3.3V supply and features a digitized differential voltage of 112.3dB minimum. The device also has integral non-linearity (INL), total unadjusted error (TUE), and offset error specifications of 0.45LSB max, 1LSB max and 50uV max, respectively.

The ADC08D1520CIYB/NOPB is capable of sampling up to 400 kHz and is ideal for applications with sampling frequencies up to 250 kHz. It has a high input impedance of 200Ω and a wide differential voltage range, making it suitable for industrial applications with high speed, low noise signals. It also features an internal voltage reference, allowing for greater flexibility and accuracy.

The ADC08D1520CIYB/NOPB has a built-in, programmable gain amplifier (PGA) with a gain range of 0.5 to 4 and a programmable gain setting. The internal PGA is controlled via the device\'s four-bit control register which is used to set the gain, resolution, and reference voltage. Additionally, the device\'s open-drain ready output indicates when the conversion is complete and the serial peripheral interface (SPI) is used to read out the digital data.

The ADC08D1520CIYB/NOPB works by converting an analog signal into a digital one, which is then transmitted to a digital system or other device. The incoming input signal is divided by the internal PGA which then amplifies the low-level signals for conversion to a digital format. The device has a single track and hold (T&H) voltage input and a 16-bit, delta-sigma analogue-to-digital converter (ADC). The output of the ADC is then converted to a digital signal and transmitted to the SPI/I2C for communication.

The ADC08D1520CIYB/NOPB is suitable for a variety of industrial applications such as machine control, process control, and factory automation. The device is small and low profile and it has the ability to sample at up to 400 kHz, making it ideal for high speed and low noise signals. The device is highly accurate and the 16 bit output can be used to detect even small changes in the input signal. In addition, the device\'s agreement with a single 3.3V supply and low current draw make it ideal for battery-powered application.

The specific data is subject to PDF, and the above content is for reference