ADF4150BCPZ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ADF4150BCPZ is a clock generator, PLL (Phase Locked Loop) and frequency synthesizer used in various applications. The device operates with a selectable supply voltage range of 1.8 to 3.3V and its output frequency range is 0.1 to 192MHz. This device includes a Frequency Synthesizer section with a 10-bit Resolution Phase/Frequency Detector, a dual-modulus Prescaler (Ratio 8/9) and a Numerically Controlled Oscillator (NCO). In addition, it contains an on-chip Voltage Controlled Oscillator (VCO), a 5-bit Programmable Divider, a Clock Divider, an On/Off Switch, and a Power Down Circuit.

ADF4150BCPZ Application Field

ADF4150BCPZ is designed for applications requiring high frequency clock sources. Typical applications include frequency synthesis/generation, clock/timing generation, Clock extraction/generation, timing, modulation and frequency synthesis. It is also well suited to multi-port communication systems such as Bluetooth, Wi-Fi, cellular, USB and Ethernet protocols.

ADF4150BCPZ is used in many other types of electronic equipment and systems. These applications include microwave transmitters, radar systems, instrumentation, communication systems, navigation systems, and test and measurement systems. It can also be used in a variety of fixed line and wireless mobile telephone infrastructure radios such as base stations, access points, and repeaters.

ADF4150BCPZ Working Principle

The main components of the ADF4150BCPZ include a Frequency Synthesizer section and a VCO. The Frequency Synthesizer section and the VCO are connected through a 5-bit Programmable Divider, a Clock Divider and an On/Off Switch. The Frequency Synthesizer section contains a 10-bit Resolution Phase/Frequency Detector, a dual-modulus Prescaler (Ratio 8/9) and a Numerically Controlled Oscillator (NCO). The NCO produces an output signal with a frequency equal to the reference frequency times a frequency multiplication factor which is programmed via the prescaler. This frequency multiplication factor ranges from 1 to 256. The VCO is driven by the NCO output and produces an output signal with a frequency equal to the reference frequency times the VCO multiplication factor. This VCO multiplication factor ranges from 1 to 1024. The Clock Divider is used to divide the VCO output signal frequency into two separate output signals of different frequencies.

The On/Off Switch is used to enable or disable the output signals from the ADF4150BCPZ. When the switch is enabled, the output frequency will be equal to the reference frequency times the frequency multiplication factor. When the switch is disabled, the output frequency will be equal to zero. The Power Down Circuit is used to put the device into a low power mode, in which it consumes less power and produces no output.

In addition, it includes a Frequency Range Selection Pin which allows the frequency range to be selected from 1.8 to 3.3V. The onboard power-on reset circuit ensures that the device is ready for use when the power is turned on. The device can also be programmed over the I2C interface, which enables the user to access the device memory for custom setting and programming.

Overall, ADF4150BCPZ is an optimal solution for high frequency clock sources applications, providing excellent accuracy and repeatability. With its wide range of features, it is suitable for implementations in many different applications.

The specific data is subject to PDF, and the above content is for reference