ADG1219BRJZ-REEL7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ADG1219BRJZ-REEL7 device is an interface component that is part of the Analog Switches, Multiplexers, and Demultiplexers family. It is a multiplexer that contains two independent, single-pole double-throw, or SPDT, switches. The device contains a total of four inputs, each capable of connecting to two different output ports or, in the case of a 2-to-1 multiplexer, two input connections that both connect to the same output.

The two switches within the device are referred to as A and B, and each can be independently controlled by two control signals, S1A and S1B. When the control signals applied to these inputs are HIGH, the outputs of the multiplexer are connected to the A inputs and disconnected from the B inputs. Conversely, when the control signals are LOW, the opposite is true.

The ADG1219BRJZ-REEL7 provides four options for output drive: high-impedance (HiZ), push-pull single-ended (pp-se), push-pull differential (pp-dif), and open-drain (OD). In HiZ mode, both sides of the switch output remain at a high impedance, or open circuit, state. In push-pull single-ended (pp-se) mode, both sides of the switch output swing between the supply voltage and ground. In push-pull differential (pp-dif) mode, the two outputs of the switch swing between the two supply voltages. Finally, in open-drain (OD) mode, one side of the switch output is left open and the other is driven to either the supply voltage or ground.

The ADG1219BRJZ-REEL7 device also contains two CMOS logic control inputs that are used to enable and disable the device. The enable input, EN, is used to enable or disable the multiplexer. When the enable input is LOW, the multiplexer is disabled and a high-impedance state is present at each output. When the enable input is HIGH, the multiplexer is enabled and the outputs are switched according to the logic state of the control inputs.

The ADG1219BRJZ-REEL7 is commonly used in a range of applications. At its most basic, it is used as a simple SPDT switch for connecting one of two different input signals to one output. This simple application can be used in a variety of situations, such as a make/break switch, motor controller, or digital signal selector. It can also be used to multiplex a number of input signals, allowing more than two inputs to be routed to a single output. Multiplexing is often used in communication applications, such as modems and radios, where it allows multiple input signals to be transmitted over a single channel.

The ADG1219BRJZ-REEL7 can also be used to implement logic functions, such as AND and OR gates. By using the different drive modes, the device can be used to implement complex logic functions, such as 4-bit shift registers or ALUs (arithmetic logic units). Additionally, the device has found applications in a wide range of consumer electronics, such as LCD displays, computer monitors, and audio systems.

The ADG1219BRJZ-REEL7 is a versatile device that is able to provide a wide variety of functions within a limited space. Its wide range of applications and functions make it an ideal choice for a variety of applications, from communication and consumer electronics to communications and automotive applications. From its basic concept to its complex implementations, the ADG1219BRJZ-REEL7 is a powerful device that can greatly improve the performance of any system.

The specific data is subject to PDF, and the above content is for reference