ADG901BRM-REEL7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Switches are electronic switches designed to control the flow of signals through a network of two or more devices. An RF switch is typically a semiconductor device which includes an integrated circuit (IC) embedded in a conductive substrate. The RF switches are used in a wide range of applications that require isolation, protection and signal routing. ADG901BRM-REEL7 is an RF switch that provides high performance, high isolation and fast switching for RF applications.

The ADG901BRM-REEL7 is a single pole double throw (SPDT) switch that is designed to provide high isolation, fast switching and low power consumption. This RF switch consists of four terminals and has a frequency range from 0.5 to 4 GHz. The on resistance of the ADG901BRM-REEL7 is 35Ω and the off resistance is 35Ω. This RF switch can handle up to 40 dBm of power, and its switching speed is less than 20 ns. The isolation of this RF switch is better than 65 dB. This RF switch can also be used for switching on and off a signal. Moreover, the ADG901BRM-REEL7 contains a dielectric that is capable of maintaining low leakage under high voltage and temperature.

The ADG901BRM-REEL7 is widely used in RF applications such as wireless communication systems, cellular phones, base stations, and 802.11 WLAN. This RF switch can also be used in Marine Radar System, Satellite TV, wireless data communication, instrumentation, and test and measurement systems. The ADG901BRM-REEL7 is the perfect solution for switching high power signals such as digital RF signals, VSAT, and GPS.

The working principle of the ADG901BRM-REEL7 is based on the pin configuration. It has four pins which can be easily configured to switch the signal. The input pin of the switch is connected to the RF source and the output pin is connected to the load. When the switch is closed, the signal will be routed from the input to the output, and when it is open, the signal will be blocked. The switching process is completed by either a single pull-up (SPU) or a double pull-up (DPU) configuration. In SPU configuration, the input and output signals are connected to each other for switching while in DPU configuration, the input and output pins are connected to the second and third terminals of the RF switch.

The ADG901BRM-REEL7 is designed to provide low power consumption, fast switching speed, adequate isolation and high linearity for RF applications. Its wide frequency range, high power capability, low on-resistance, and excellent signal integrity make it the ideal choice for demanding high performance RF applications. Furthermore, the ADG901BRM-REEL7 switch is easy to configure and has been designed to deliver high performance and reliable operation in a variety of environments and applications.

The specific data is subject to PDF, and the above content is for reference