ADG918BRMZ-REEL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Switches are devices that allow electric signals to be switched on or off by use of radio frequency. The ADG918BRMZ-REEL is a high performance, low-current based, low-insertion loss, reflective-type RF switch IC. This switch operates from 0.1 GHz to 3 GHz, making it suitable for use in a variety of radio frequency applications.

The ADG918BRMZ-REEL is a high speed switch. It is composed of multiple reflective switches operated in parallel to switch multiple paths. This reflective switch is a four-port device. It is a single reflection switch with independent input and output ports. There are four ports, labeled as analog, control, ground, and encoder. The control port can be used to enable or disable the SPDT switch.

The ADG918BRMZ-REEL works on the principle of a reflection switch. In a reflection switch, incoming signals are reflected off the reflecting surface of the switch. When the signal is reflected back, it brings with it an increased signal strength as well as a shift in frequency. This shift in frequency can be used to determine the path the signal takes. When the signal reaches the transistor, it is amplified and switched on or off, depending on the level of the control voltage.

The ADG918BRMZ-REEL is typically used in applications such as wireless LANs, RF transceiver systems, Bluetooth systems, and wireless accessories. It is also useful in other applications that require the switching of high-frequency signals. The switch IC has high isolation levels of +41 dB at 0.1 to 1.0 GHz and +48 dB at 1.0 to 3.0 GHz. This helps reduce interference between the various devices connected to the switch. It also has low-noise characteristics of -95 dBc/Hz at 1.0 to 3.0 GHz, making it suitable for applications that require low-noise operation.

The ADG918BRMZ-REEL is a reliable, low-cost RF switch solution for a variety of different applications. Its high isolation and low-noise characteristics make it ideal for radio frequency applications. Due to its reflective nature, it can be used in applications that require quick switching of high-frequency signals. Its low power consumption and low current requirements make it an ideal choice for battery-powered devices. Its low insertion loss ensures that signals are not attenuated when passing through the switch. This makes it suitable for applications requiring precise signal control.

The specific data is subject to PDF, and the above content is for reference