AISC-0805F-330G-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors are widely used in a variety of electronic equipment, and AISC-0805F-330G-T is one type of such inductors. This type of fixed inductors is mainly used in circuits for signal filtering, as attenuators, and to couple direct current (DC) signals or alternating current (AC) signals in integrated circuits.

These inductors are specially designed to provide specific gauge and form factor. The AISC-0805F-330G-T Inductor is a case size 0805 with a total height of 0.55mm with inductance of 330 nanohenries. It is constructed using a ferrite core with polyimide coated copper wire windings, and rated current of 100mA.

AISC-0805F-330G-T inductors are constructed with a ferromagnetic core, which is typically made of a ferrite material or powdered iron. The core material is designed to have minimal electrical losses and will help to limit the amount of energy that is lost in the system due to heat dissipated from the inductor itself. The physical size of the core also limits the amount of energy that can be stored within it and this limit is usually expressed in terms of inductance.

The winding of AISC-0805F-330G-T inductors are made of copper wire, which is wound onthe ferromagnetic core in a specific pattern. The winding pattern is designed to provide the required amount of inductance within a given geometry. The amount of copper used in each winding and the overall number of wire turns determines the inductance of the inductor. The copper wire is also covered with a polyimide coating to help protect the copper wire from corrosion.

When current is passed through an AISC-0805F-330G-T inductor, a magnetic field is produced. The magnetic field is generated by the movement of electrons through the winding. This movement of electrons is known as an electromagnetic wave. As the electrons move through the winding, they can induce currents in nearby devices. These induced currents can be used for signal filtering or as attenuators.

AISC-0805F-330G-T inductors can also be used in DC circuits, as they provide high efficiency power conversion. The inductor is designed to store energy for later use and when a DC source is used, the core and windings work together to store and later release the energy. This type of inductor is also used in AC circuits to couple DC signals, or to provide signal conditioning for AC signals.

The specific data is subject to PDF, and the above content is for reference