AK93C45CU

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The AK93C45CU is a low-cost serial EEPROM memory that is commonly used in a variety of applications. The AK93C45CU is a Serial Peripheral Interface (SPI) device with a 1K x 8-bit (8Kbit) capacity. It is available in a variety of package configurations, including PLCC and SOIC. The AK93C45CU features an SPI serial interface, write-protect pin, and two address pins which enable the device to be addressed up to eight times the basic memory size of 1K bits. This makes it an ideal memory device for applications that require high-density, low-cost storage.

The AK93C45CU is a device of the Non-Volatile Memory (NVM) family. It is commonly used to store constant data and parameters that can be repeatedly accessed, yet cannot be easily modified or erased. Common applications for the AK93C45CU include, but are not limited to, automotive navigation, medical instrumentation, security systems, process control systems and data logging.

The AK93C45CU is a fast, low-power memory that can be accessed over a vast range of temperatures. It has a wide range of operating temperatures from -40°C to 85°C and features a fast read access time of 7.5 ms. It is also capable of being commanded to UP/DOWN or erase its own memory via the serial data bus.

Aside from its low-power and fast read access time, the AK93C45CU provides additional features that make it a great choice for memory applications. The most notable of these features is its patented two-layer shielding which isolates the SPI signals from noise and analog signals, providing greater signal integrity and allowing faster data rates. Additionally, the AK93C45CU features an embedded 55-bit error-code correction system which allows for even greater data accuracy.

The AK93C45CU works on a basic principle. When a command is sent over the serial data bus, it is interpreted by the EEPROM and it will perform an operation as specified. There are six commands that can be sent over the serial data bus; Read, Write, Increment, Decrement, Poll and Write Protection. Each of these commands are interpreted and acted upon by the ARM controller core integrated within the AK93C45CU device.

In order to write data to the device, a write command must be issued. This command will be decoded and the data will be written sequentially to the internal memory of the device. To read data from the device, a read command must be issued, and the data will be read from the specified address. The device will continue to read from the address specified until the read command is terminated. Additionally, the Poll command can be used to check the status of the internal registers and flags of the device, enabling the user to read the device’s status without having to send a read command.

The AK93C45CU is an excellent memory device for a variety of applications. It is a low-cost, low-power device that features a fast read access time, wide operating temperature range, embedded error-code correction system, and two-layer shielding that isolates the SPI signals, providing greater signal integrity. The device can be commanded to UP/DOWN or erase its own memory via the serial data bus and can be addressed up to eight times the basic memory size of 1K bits. All these features make the AK93C45CU an excellent choice for a variety of applications needing robust, low-cost, memory.

The specific data is subject to PDF, and the above content is for reference