ALD2301BPAL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ALD2301BPAL is a differential-type comparator from STMicroelectronics. It features a low input bias current of 0.3pA and a wide common mode range from -20V to +20V. It operates from a single 2.5V supply, has a 2-MHz bandwidth, and has low static and dynamic power dissipation. The comparator also features diffierential inputs with ESD protection, a high-speed output with 25mA sink current, an enable pin, and an active-low reset pin.

The ALD2301BPAL is a linear comparator with an input offset voltage of 0.3mV, input bias current of 0.3pA, and common-mode range from –20V to +20V. It is available in 8-pin DIP, SOIC, and TSSOP packages. This comparator is mainly used for automotive applications, such as engine control, daytime running lamps, seat belt reminder systems, and airbag systems.

The ALD2301BPAL is designed to operate from a single 2.5V supply and has an output current of up to 25mA. The comparator also has an enable pin that can be used to disable the device in order to save power when not in use. It also has an active-low reset pin that can be used to force the output low when the supply voltage drops below a certain level.

The working principle of the ALD2301BPAL is simple. It works by comparing the two differential inputs (IN+,IN-) with respect to the reference voltage (VREF) and then outputting a high output if one of the inputs is higher than the reference voltage and a low output if lower. The enable pin enables and disables the device, while the reset pin resets the comparator when the supply voltage drops below the threshold value.

In conclusion, the ALD2301BPAL is a versatile comparator from ST Microelectronics that is primarily used for automotive applications. It is a differential-type comparator that features a low input bias current of 0.3pA, wide common mode range from –20V to +20V, a 2-MHz bandwidth, and low static and dynamic power dissipation. It has an enable pin and a reset pin, as well as an output current of up to 25mA. The working principle of this device is very simple; it compares the two differential inputs with respect to the reference voltage and then outputting the result.

The specific data is subject to PDF, and the above content is for reference