ALS80H133QW400

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are widely used to store energy, to filter signals, and to smooth power distributions in many electrical systems. With their easy polarisation, wide capacitance range, and low cost, they are considered one of the most popular types of capacitors. The ALS80H133QW400 is one such example, typically used in automotive, power supply, consumer electronics and industrial applications.

An aluminum electrolytic capacitor consists of two aluminum foils on either side of an oxide-coated dielectric paper which is soaked in an electrolyte. The two aluminum foils are usually separated by a thin paper spacer. The negative foil serves as the anode of the capacitor, and is thus engraved with a limitless supply of holes. The anode is then attached with an electrolyte and impregnated with anodes. The anode also has an internal foil that is surrounded by an electrolytic solution.

The oxide coated dielectric paper holds a charge, and thus, serves as the layer of insulation between the anode and the cathode. The anode foil is then wound into a cylinder with the oxide coated paper at its center. This cylinder is then fit into a sealed casing with an electrolyte and a rubber seal at the top.

The performance characteristics of an aluminum electrolytic capacitor depend on the temperature of the environment in which it is placed. In general, the capacitance of an electrolytic capacitor decreases steadily as the temperature rises. However, this decrease can be minimized by using a higher-grade aluminum and/or higher grade electrolyte.

The ALS80H133QW400, in particular, is a radial lead aluminum electrolytic capacitor. It is designed for use in automotive, power supply, consumer electronics, and industrial applications. Its rated working voltage is 80 volts, and its capacitance is 133uF at rated voltage and 25°C.

The ALS80H133QW400 operates at temperatures between -25°C to +125°C. It has a maximum ripple current of 22uA at 120kHz, and a maximum lifetime of up to 2000 hours. The capacitor can be used in equipment requiring any of these parameters. It is designed to achieve a high level of performance and reliability.

In conclusion, the ALS80H133QW400 aluminum electrolytic capacitor is designed for use in a broad range of applications such as automotive, power supply, consumer electronics, and industrial applications. It has a maximum capacitance of 133uF and a rated working voltage of 80 volts, and it is designed to achieve high levels of performance and reliability. All in all, this type of capacitor is an excellent choice for a variety of applications requiring either high capacitance or high reliability.

The specific data is subject to PDF, and the above content is for reference