ALS80U163NJ200

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors consist of an anode aluminum foil, a cathode aluminum foil and an electrolytic paper. They use a solution of boric acid and other salts in water to form an electrolyte. The capacitor is charged when an electric current passes between the two electrodes, which causes a reversible oxidation reaction in the anode layer. The resulting chemical reaction forms a thin dielectric layer across the two electrodes. This results in the storing of electrical energy in the capacitor.

ALS80U163NJ200 is a type of aluminum electrolytic capacitor. It is a radial leaded, non-polarized type, which allows for easier circuit board placement than polarized capacitors. It is rated at a temperature range of -55°C to 85°C.

The ALS80U163NJ200 is typically used for filtering, decoupling, and storing energy in many consumer electronics such as motor controllers, lighting systems, and medical imaging machines. It is a reliable, low-cost solution that provides a good combination of capacitance and electrical performance over a broad temperature range. The capacitors are rated for a wide range of applications, including bypassing, filtering, and storing energy.

The ALS80U163NJ200 works by allowing an electric current to flow through an electrolyte, or ionized solution, between the electrodes. As the current passes through, it causes a chemical reaction in the anode of the capacitor that forms the dielectric layer. This layer acts as an insulator to store electrical energy for later use. When a voltage is applied to the capacitor, the stored energy is released and used to power various devices. This makes these aluminum electrolytic capacitors ideal for use in power supplies, motor controllers, and other power management applications.

The capacitor is also suitable for use in noise reduction applications due to its low ESR and ESL values. The low ESR value ensures that the capacitor can absorb high current spikes and maintain a consistent voltage over a wide temperature range. The low ESL value also helps ensure the capacitor will not cause any distorted waveforms, thus providing clean and balanced signal output.

Moreover, the ALS80U163NJ200 features a ripple current rating of 1.2 A, making it suitable for high performance applications. Its long life rating of 2000 hours also allows for a wide variety of applications, including high frequency, high power, and high voltage applications.

In conclusion, the ALS80U163NJ200 aluminum electrolytic capacitor is a reliable, low-cost solution suitable for use in many applications. It is highly efficient in providing a combination of a large capacitance and electrical performance over a wide range of temperatures. Furthermore, its low ESR and ESL values ensure reliability in noise reduction and power management applications. Finally, its high ripple current rating and long life rating make it suitable for even the most demanding applications, including high frequency, high power, and high voltage applications.

The specific data is subject to PDF, and the above content is for reference