AQ4021-01FTG-C Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS diodes are special diodes that are designed to protect a circuit from voltage transients. In other words they act as surge protectors and safeguard a circuit against sudden voltage spikes caused by an overload of the line. The AQ4021-01FTG-C is a transient voltage suppression (TVS) diode which has been specifically designed to protect both the signal and power lines it is connected to. It is particularly well-suited for protecting high frequency and/or low voltage signals which need to be prevented from experiencing a voltage surge.

When the connected current begins to exceed the rated maximum current of the diode, it will clamp the voltage to a safe level, thus protecting any further damage to the circuit. The AQ4021-01FTG-C is designed for a maximum continuous forward current of 1A, with its voltage rating ranging from 14volts to 28volts. In addition, it also boasts a maximum transient peak pulse current of 5A, and a peak pulse power dissipation of 2.8W.

When it comes to the application field of the AQ4021-01FTG-C, it can be used in many different areas, including automotive electronics, consumer electronic products, telecommunications, and industrial devices. One of the most notable features of the AQ4021-01FTG-C is its low clamping voltage of 14volts, which is considerably lower than most TVS diodes of similar specifications. This makes it particularly well-suited to protecting data lines which need to carry low voltages, as well as digital and analog signals.

The working principle of the AQ4021-01FTG-C can be summed up in a few short steps: first, it will detect any changes in the voltage of the circuit and respond almost instantaneously by limiting the increase in voltage; second, it will allow current to pass through the diode, thus draining the excess voltage; and finally, the diode will reassume its initial state, thereby returning the circuit to its original condition.

In conclusion, the AQ4021-01FTG-C is an extremely reliable and versatile transient voltage suppression diode that can be used to protect both the signal and power lines of a wide range of electronic devices. With a maximum continuous forward current of 1A and a peak pulse current of 5A, it is highly effective in preventing damaging voltage surges from occurring. Its low clamping voltage of 14volts also makes it ideal for protecting low voltage and sensitive data lines. As such, it is an indispensable tool for use in a range of different industries, and can be relied on for protection in any circuitry.

The specific data is subject to PDF, and the above content is for reference