AS1528-BTDR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Analog-to-digital converters (ADCs) are used to convert analog signals into digital ones suitable for processing by digital systems. One such device is the AS1528-BTDR, which focuses on low power analog-to-digital conversion. It is a CMOS, low-power, analog-to-digital converter which can be used in many applications.

The AS1528-BTDR has a wide range of features, including a wide operating temperature range, a low power supply voltage range, a high sampling rate, and an extended dynamic range. The device has a maximum sampling rate of 50MSPS with a +/-5LSB accuracy of 12 bits, and a minimum startup time of 0.25microseconds. These features make the device suitable for high speed and large amplitude analog signals. It also has a 16-bit ready-to-use digital-to-analog converter (DAC) on board, which makes it ideal for applications such as wireless communication, audio, and automotive control.

The AS1528-BTDR operates on a single 3V power supply and consumes less than 500mW of power. It supports a wide range of input signals, from 0.1V to 1.8V or -1.0V to +1.8V. The device has a wide range of digital outputs, including a serial interface, an 8- or 16-bit parallel data stream, or a 20-bit code. The output data rate is adjustable up to 25MSPS, with a latency of 5 clock cycles. The device also includes a built-in digital low-pass filter (DFL), which allows smooth and accurate analog signal sampling.

The AS1528-BTDR can be used for a variety of data acquisition applications, such as medical imaging systems, test and measurement, and audio/video systems. It is also suitable for signal processing applications such as audio/video transcoding, filtering, signal regeneration, signal conversion, and signal analysis. Furthermore, it can be used in security systems for surveillance and monitoring.

The working principle of the AS1528-BTDR is based on delta-sigma conversion. In this type of conversion, the analog input signal is sampled at a constant rate and the sampling results are used to produce a digital output. The working of the device includes three main steps. In the first step, the analog signal is sampled and quantized by the analog-to-digital converter. Then, the data is processed by the built-in digital low-pass filter to reduce the effects of quantization noise. Finally, the data is output as a digital signal.

The specific data is subject to PDF, and the above content is for reference