AS3PMHM3/87A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to AS3PMHM3/87A

The AS3PMHM3/87A is an upgrade to the original AS3P series of rectifier diodes, and one of the most popular single rectifiers on the market. As the first consequence of reducing thermal and power losses by optimized version of the chip, this new generation of single rectifiers offers superior performance when compared to its predecessors. This makes the AS3PMHM3/87A ideal for a variety of applications.

The AS3PMHM3/87A is in the category of “single rectifiers” because it uses one block of reversed-biased semiconductor junction to convert alternating current (AC) to direct current (DC). The rectified current is the same regardless of the amplitude, frequency, or waveform of the input current, provided the voltage is within the power rating of the device. This makes the AS3PMHM3/87A one of the most versatile types of rectifiers, allowing it to be used in a wide range of applications.

Application Field of AS3PMHM3/87A

The AS3PMHM3/87A can be used in a variety of applications, ranging from consumer electronics to industrial and automotive applications. For example, the device can be used to regulate the amount of current sent to sensitive electronic components, such as microprocessors, audio amplifiers, and power supplies for medical equipment. In addition, its superior performance makes it well-suited for use in automotive applications, such as fuel pumps and ECUs.

Moreover, the AS3PMHM3/87A can also be used to create a DC power source from multiple power source, such as solar cells and wind turbines. In many cases, this can help to improve the efficiency of the power source by providing a steady, continuous power stream rather than unbalanced or fluctuating current. In addition, since the device can be used with multiple input voltages, it is able to provide a stable power supply at both high and low temperatures.

Working Principle of AS3PMHM3/87A

The working principle of the AS3PMHM3/87A is based on the forward voltage drop of the rectifier. When the applied voltage is reversed, the rectifier breaks down and forms an electric field. This electric field creates a current in the forward direction, which is then amplified by the rectifier. The current then passes through the diode to provide the desired voltage across the load.

To ensure proper operation, it is important that the working voltage of the diode is kept within the acceptable operating range. Generally, this range is between 11 and 36 volts. In addition, it is important to remember that the current must be limited to the rated ampere output of the device. In the case of the AS3PMHM3/87A, the rated ampere output is 800mA.

Once the rectified voltage is supplied to a load, the effects of ripple, noise, and harmonics are reduced. This is because the diode acts to “clip” the voltage, removing any excess current or voltage components. This ensures a smoother power supply, and can help to reduce power losses in the system.

In addition, the AS3PMHM3/87A can be used to provide reverse protection for a non-polarized device. In this case, the diode acts as a filter, preventing any reverse currents from flowing. This can help to protect sensitive components from damage, and increases their longevity in the field.

Conclusion

The AS3PMHM3/87A is a new generation of single rectifiers, which offers superior performance when compared to its predecessors. This makes it ideal for use in a variety of applications, such as consumer electronics, automotive applications, and power sources for medical equipment. Its working principle is based on the forward voltage drop of the rectifier, and it can be used to provide protection against reverse currents and reduce power losses in a system.

The specific data is subject to PDF, and the above content is for reference