AT24C08AN-10SU-2.7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Memory

The AT24C08AN-10SU-2.7 is a popular memory device used in many devices. It is a 8 Kilobit (1Kx8) CMOS Serial Electrically Erasable Programmable Read Only Memory (EEPROM) that is designed for use in applications calling for small capacity, fast write cycle times and high data retention.

This memory chip is ideal for applications in vehicles, GPS navigation systems, mobile phones, and portable and embedded systems. It is an affordable, reliable and low power memory solution for many applications.

Application Field

The AT24C08AN-10SU-2.7 can be used in automotive, industrial, telecommunications, data storage, and consumer applications. In automotive applications, the AT24C08AN-10SU-2.7 can be used to store program code, system parameters, diagnostic, and customer requirements in a vehicle’s electronic system. In industrial applications, the AT24C08AN-10SU-2.7 can be used to store product factory settings, system configuration data and service parameters. In telecom applications, the AT24C08AN-10SU-2.7 can be used to store user preferences and customization settings of a LTE / 3G modem. In consumer electronic products, the AT24C08AN-10SU-2.7 can be used to store vital user settings, language preferences and product parameters.

Working Principle

The AT24C08AN-10SU-2.7 operates on a 3-wire serial interface. It meets both the I2C protocols (I2C address 0x50) with speeds up to 100 kbps and the SPI protocol (SPI CS pin is active low) with speeds up to 8 Mbps. It has a maximum Operating Voltage of 2.7V, with a maximum programming time of 2ms and a maximum Endurance of 100,000 Cycles.

The AT24C08AN-10SU-2.7 includes a write protect pin which can be used to protect data against unauthorized read and write operations. In addition, it provides a write protect latch which can be used to control write protection of the entire memory array. The chip also includes an "Alarm" flag which can be set and cleared. This flag can be used to alert the system that a memory write operation has occurred.

The AT24C08AN-10SU-2.7\'s data is organized as 256 bytes of 8 bit words. It can be written to or read from in either page or byte mode. In page mode, the device can be written to or read from eight bytes simultaneously using a single write or read instruction. In byte mode, the device can be written to or read from one byte at a time.

The AT24C08AN-10SU-2.7 utilizes an internal address counter. This counter is incremented each time a byte is read or written from the chip. This allows the programmer to access any byte within the device without performing a “seek” operation.

The AT24C08AN-10SU-2.7 also uses a low-power sleep mode that reduces the device\'s power consumption during periods of non-use. This sleep mode can be activated by setting the Write Protect pin low.

The AT24C08AN-10SU-2.7 is an ideal memory solution for applications calling for small capacity, fast write operation and high data retention. Its versatile 3-wire serial interface makes it easy to be used in many applications. It is reliable, affordable and low power solution.

The specific data is subject to PDF, and the above content is for reference