AT24C512C2-10CI-2.7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Memory is a core element of electronic products, especially in microcontrollers and other embedded systems - but where the 24c512c2-10CI-2.7 comes into play? This device is a serial E2PROM from Microchip, and it is very popular in embedded products. It is embedded in many microcontroller and processor designs, for use as a data storage device. So what is this device and what does it do?

Application Field

The 24c512c2-10CI-2.7 is a CMOS serial E2PROM device from Microchip, and is based on the Microchip E2PROM Memory device family. It is a 512-Kbit Serial EEPROM, and operates over a temperature range of -40 to 85 °C, with an operating voltage range of 1.8V to 5.5V. It is used in a wide range of applications, including automotive, consumer and industrial applications. The 24c512c2-10CI-2.7 is also suitable for use in embedded systems. It is a versatile device, offering a wide range of features and benefits, including low-power consumption, fast read/write access times, high reliability, and high performance. The device is designed with a three-wire serial interface (SI, SO, SCLK) which enables users to easily integrate the device into their existing systems. In addition, the device also supports deep power-down and block write operations.

Working Principle

The 24c512c2-10CI-2.7 device is an I2C-based serial E2PROM device from Microchip. It is an 8-pin device, with the pins arranged in a "pin-out" configuration for easy access and use. The device is connected to an I2C-bus, which is used for communication between the device and the microprocessor. The device also supports master and slave modes of operation. In Master mode, the device communicates with a microcontroller or other device, using the I2C-bus. This mode is used when the device is being used as a memory device. In Slave mode, the device acts as a peripheral device and communicates with the microcontroller or other device, using the I2C-bus. This mode is used when the device is being used as an I2C peripheral device.

The 24c512c2-10CI-2.7 device has a total memory capacity of 512K bits, which is organized into 64K pages, each containing 8K of data. The device supports a wide range of read/write operations, including block-read/block-write and sequential-read/write operations. It also supports error correction codes (ECCs) for data integrity. The device supports a variety of error detecting/correcting codes which enable reliable operation, even in noisy environments.

The 24c512c2-10CI-2.7 device also supports various I/O modes, including interrupt and reset pins. The interrupts allow the device to notify the host processor when a byte of data has been written, or when a byte of data is received. The reset pin is used to reset the device, to a known state. The device also features an acknowledgment pin, which is used to indicate that the device is operational and ready to accept data.

The 24c512c2-10CI-2.7 device can also be used with a variety of I2C-busmaster devices, including microcontrollers, digital signal processors (DSPs), FPGAs, and ASICs. This enables the device to be used in a variety of applications, including automotive, consumer and industrial applications.

Conclusion

The 24c512c2-10CI-2.7 is a popular I2C-based Serial EEPROM device from Microchip. It is a versatile device, offering a wide range of features and benefits, including low-power consumption, fast read/write access times, high reliability, and high performance. The device is suitable for use in a variety of applications, including automotive, consumer and industrial applications. The device supports a wide range of read/write operations and I/O modes, which make it a reliable, flexible, and cost-effective solution for embedded systems and other applications.

The specific data is subject to PDF, and the above content is for reference