AT25640T1-10TI-1.8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Memory can be divided into two categories: volatile memory, which requires a constant power supply to maintain the content stored in it, and non-volatile memory, which is able to retain content without the need of a constant power supply. AT25640T1-10TI-1.8 belongs to the category of non-volatile memory.

AT25640T1-10TI-1.8 consists of an array of 1.8V 64K-bit CMOS EEPROM. It uses a serial interface protocol, which includes a 4-wire interface compatible with I2C, 100kHz /400kHz/1MHz operation speed level, and a high level output buffer. All control signals for the AT25640T1-10TI1.8 are generated via the I2C bus.

AT25640T1-10TI-1.8 can be used in a wide range of applications such as set-top boxes, car navigation systems, TVs, radio receivers, audio-visual equipment, remote controllers, or other embedded products. With its ultra-low power CMOS technology, it can provide high integration, fast data access, higher reliability, and lower cost for these products.

AT25640T1-10TI-1.8 has various applications in the field of memory. One of its most common applications is in data logging. Data logging involves the storage of information over a period of time, which AT25640T1-10TI-1.8 is capable of doing through its non-volatile memory. With AT25640T1-10TI-1.8, information such as temperature readings, or water levels can be stored for long periods of time, which can be used for analysis and monitoring.

AT25640T1-10TI-1.8 can also be used for setting parameters for embedded products such as remote controllers, TVs, and audio-visual equipment. With its high level output buffer and I2C serial interface, it allows these products to be configured and programmed with ease. This greatly reduces the need for manual intervention and improves the reliability and accuracy of these products.

The working principle of AT25640T1-10TI-1.8 is fairly simple. The I2C bus sends information to the chip, which will then process the information and store it in its memory. When the chip is called upon to send data, it will access the memory and transmit the information over the I2C bus. This process is repeated until all the information has been processed and stored.

AT25640T1-10TI-1.8 provides an ideal solution for storing data and setting parameters for embedded products. Its low power CMOS technology, high level output buffer, and I2C interface allow for high integration and faster data access, which is ideal for use in embedded product systems.

The specific data is subject to PDF, and the above content is for reference