AT34C02CN-SH-B

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The AT34C02CN-SH-B is a memory device used in a variety of consumer, industrial, and military applications. This device combines nonvolatile EEPROM storage for program, data, or configuration storage, with an enhanced data integrity protocol. The AT34C02CN-SH-B is a 2-Wire serial EEPROM device that requires only a clock line and a data line for communication with a controlling device.

The application fields of the AT34C02CN-SH-B are quite widespread. It is used by manufacturers of consumer electronics and appliances to store configuration settings and program code. It is also used in military equipment, space-based sensors, and navigation systems. It is also used in safety-critical applications where data integrity and error correction are of paramount importance.

The AT34C02CN-SH-B is based on the I²C bus, a two-wire serial bus designed by Philips (now NXP). The I²C bus is used to communicate between two or more digital devices, usually on a single board. The AT34C02CN-SH-B operates at a standard 3.3V logic signal level and is capable of a maximum transfer rate of 400 kbit/s. It implements a CRC checking scheme which ensures that the data being transferred is valid and without errors.

The AT34C02CN-SH-B has a page write capability, allowing up to 128 bytes of data to be written to the device in one cycle. Writing data to the device is done in the same way as reading it so there is no need for a dedicated write control line. This makes interfacing the device to a host processor or controller much easier.

The device\'s working principle is quite simple. Before writing data to the device, the data must first be encoded according to the I²C protocol. This encoding ensures that the values of bits within the byte being sent to the device are all within the specified limits and also ensures that any errors in the data are detected. Data is then sent to the device and stored in its memory.

Reading and writing the data stored in the AT34C02CN-SH-B\'s memory is done in the same way. Data is encoded according to the I²C protocol, then sent to the device where it is decoded and stored in the device\'s memory. When the data is read from the device, the same encoding and decoding process takes place and the data is retrieved from the device.

The AT34C02CN-SH-B is a versatile, low-cost memory device that can be used in a variety of applications. It offers a reliable, low-cost form of data storage and transfer with a high degree of reliability and data integrity. Its combination of nonvolatile memory and an enhanced data integrity protocol make it ideal for a wide range of applications where data integrity and reliability are of paramount importance.

The specific data is subject to PDF, and the above content is for reference