ATB105M050

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors are a type of capacitor that uses an aluminum oxide film as a dielectric and an electrolyte as a catalyst. This type of capacitor is commonly used in power supplies, amplifiers, and other high-frequency applications. The ATB105M050 is an aluminum electrolytic capacitor, designed for a nominal capacitance of 105μF at a rated voltage of 50V.

Application Field

The ATB105M050 is a type of electrolytic capacitor commonly used in audio applications. As the name suggests, these capacitors are designed to operate within a specific frequency range. They are used for filtering, storage, and sound attenuation. This type of capacitor can also be used in power supply regulation and voltage transient filtering, especially in high-frequency circuitry, as well as for the production of low-noise audio signals. They are also used in switched-mode power supplies, where capacitors are used to suppress unwanted noise, as well as in AC line filters.

The ATB105M050 is also commonly used in guitar pedals, as they are generally capable of handling large amounts of power. These capacitors are used in effects circuits, such as delays, compressors, fuzz boxes, and distortion. They are also used in microphone preamps, for better signal response and tonal character. This type of capacitor is also used in amplifiers, as they provide a stable power supply while reducing noise.

Aside from their use in audio applications, ATB105M050 capacitors are also used in automotive and household applications, where they are often used as part of a power supply circuit. Capacitors are also used as energy storage, for things such as starting motors, lighting, and winching systems. They are also used in smoothing and ripple control circuits, as well as in motor and battery containers.

Working Principle

Aluminum electrolytic capacitors use an electrolyte, usually a combination of boric acid and sulfuric acid, to form a thin aluminum oxide layer on a thin sheet of electrolytic aluminum. This layer serves as the dielectric, insulating the capacitor elements from one another, allowing them to store and deliver electrical energy. The two capacitor plates are then connected to external electrodes, allowing current to flow between them.

The ATB105M050 is rated for a maximum voltage of 50V, meaning that it can store and deliver up to 50V of electrical energy. The capacitance of the capacitor can be determined by the size of the two plates, the spacing between them, and the type of dielectric material used. Generally, the larger the plates and the thinner the electrolyte, the higher the capacitance.

The amount of time it takes for an aluminum electrolytic capacitor to charge and discharge depends on the load applied, the capacitance of the capacitor, the type of electrolyte used, and the temperature of the electrode. Generally, charges and discharges occur quickly in this type of capacitor, allowing them to be used in high-frequency applications.

Aluminum electrolytic capacitors are generally reliable components, but they do have some limitations. As capacitors, they rely on electric currents flowing through their plates to store electrical energy, which makes them vulnerable to short circuits and high levels of heat, especially when used at high operating frequencies. To ensure the best performance, it is important to pay close attention to the operating temperature and voltage of the capacitor, as well as the design of the circuit in which it is used.

The ATB105M050 aluminum electrolytic capacitor is an excellent choice for a variety of applications, from high-frequency filters to guitar pedals. It offers a reliable and efficient way to store and deliver electrical energy, and its wide operating range makes it suitable for many different types of circuits.

The specific data is subject to PDF, and the above content is for reference