ATTINY26-16MJ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ATTINY26-16MJ (hereafter referred to as AT26) is an 8-bit microcontroller, which is widely used in the embedded and industrial applications. AT26 acts as a brain for the system and it takes inputs from the sensors and actuates the devices according to requirements. The key features available on AT26 are EEPROM, working RAM, timer/counters, SPI and I2C, ADC, and USART.

Overview of AT26

AT26 microcontroller can fit into an 8 pin package, thus it is one of the uncompromise solutions for various applications. With its advanced core, AT26 can run code up to 10 MIPS. This makes the AT26 suitable for applications where the real-time response is important. Due to this, the applications suitable for AT26 range from security system and fuel delivery systems to consumer electronics and healthcare products. AT26 contains 32Kb Flash memory and 2Kb RAM. It also has 4-channel 8-bit A/D converter, 27 general I/O, working frequency up to 20MHz, and wide voltage range from 1.8 V to 5.5 V.

AT26 Working Principle

AT26 executes the set of instructions stored in its internal Flash memory to perform a particular task. The basic components used in the AT26 are ALU and Program Counter, used for calculating the intermediate results and for keeping track of the executing instruction respectively. AT26 has on-chip four 16 bit timers and a watchdog timer used for timing, measurement and runs battery backed-up applications respectively. AT26 also has an 88 bit EEPROM feature with self-timed write times of 5msec/byte. EEPROM data is maintained while the power is switched off.

AT26 Applications

AT26 is well suited for small-sized embedded and industrial applications such as safety sensors, engine control, communications and automation. Security systems use AT26 in the form of keypads, entry locks, and alarm systems, due to its excellent lightning protection, superior interference immunity, and very low current consumption ability. Another application involves the automotive industry. AT26 can be used for controlling sensors, turning on lights and other functions in the car.

AT26 is also used in consumer electronics such as mobile phones, remote controllers, cameras, electronic toys, etc. This is because of its small size, low power consumption, and high speed running applications. AT26 can also be used in telecommunications devices such as modems, transceivers, and fax machines. Moreover, medical implants are made using AT26 microcontrollers to monitor, process and transmit signals wirelessly inside the human body. It is also used for the development of embedded systems used in industrial and automotive applications due to its fast execution of instructions, low power consumption and excellent immunity against electrical noise.

Conclusion

In short, AT26 microcontroller is an ideal solution for numerous applications ranging from automotive and telecommunications to healthcare and consumer electronics. These advantages make AT26 an excellent choice for applications in which fast and reliable operations are required.

The specific data is subject to PDF, and the above content is for reference