AVE225M50B12T-F Capacitors

Polarization:	Polar
Package / Case:	Radial, Can - SMD
Mounting Type:	Surface Mount
Surface Mount Land Size:	0.169" L x 0.169" W (4.30mm x 4.30mm)
Height - Seated (Max):	0.209" (5.30mm)
Size / Dimension:	0.157" Dia (4.00mm)
Lead Spacing:	--
Ripple Current @ High Frequency:	22.5mA @ 10kHz
Ripple Current @ Low Frequency:	15mA @ 120Hz
Applications:	General Purpose
Ratings:	--
Series:	AVE
Operating Temperature:	-40°C ~ 85°C
Lifetime @ Temp.:	2000 Hrs @ 85°C
ESR (Equivalent Series Resistance):	75.36 Ohm @ 120Hz
Voltage - Rated:	50V
Tolerance:	±20%
Capacitance:	2.2µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors: AVE225M50B12T-F Application Field and Working Principle

Aluminum electrolytic capacitors are electronic components that work by storing energy using the electrochemical process. They are widely used in a variety of applications, ranging from consumer electronics to industrial automation. In this article, we’ll explain the application field and working principle for the AVE225M50B12T-F aluminum electrolytic capacitors.

Application Field

Aluminum electrolytic capacitors, such as the AVE225M50B12T-F, are primarily used in applications that require a large amount of energy storage in a small form factor. The most common applications for this type of capacitor include:

• Filtering: Aluminum electrolytic capacitors are often used in power supplies to filter out voltage spikes or ripples caused by rapid changes in current.
• Signal Coupling: The capacitors are also used to couple audio signals in audio amplifiers and to filter out DC noise signals from AC signals.
• Voltage Regulation: In high voltage inverter circuits, the capacitors are used to compensate for voltage fluctuations caused by load changes.
• Current Limiting: These capacitors are used in motor controller circuits to prevent current overloads.

Working Principle

The working principle behind aluminum electrolytic capacitors is based on two aluminum foils separated by an electrolyte material. One of the aluminum foils is the anode and the other is the cathode. When a voltage is applied, electrons are attracted from one foil to the other, creating an electric field between them. This electric field stores energy and creates the capacitance of the component.The electrolytic material used in these components is important for increasing their capacitance and for maintaining their reliability. It is usually made from a combination of organic and inorganic compounds, such as organic sulfonates, that act as electrolytes. These compounds allow a higher amount of energy to be stored in a smaller form factor than traditional capacitors, making aluminum electrolytic capacitors a popular choice.The AVE225M50B12T-F aluminum electrolytic capacitors have a capacitance of 225mF and are rated for a voltage of 50V. This capacitor is commonly used for filtering, voltage regulation, signal coupling, and current limiting applications.

Conclusion

Aluminum electrolytic capacitors are widely used in a variety of applications due to their high capacitance and small form factor. The AVE225M50B12T-F aluminum electrolytic capacitor has a capacitance of 225mF and is typically used for filtering, voltage regulation, signal coupling, and current limiting applications. The component works by creating an electric field between two aluminum foils using an electrolyte material, allowing the device to store a large amount of energy in a small form factor.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description