B41252A7338M

Operating Temperature:	-40°C ~ 105°C
Package / Case:	Radial, Can - Snap-In
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	1.063" (27.00mm)
Size / Dimension:	0.866" Dia (22.00mm)
Lead Spacing:	0.394" (10.00mm)
Ripple Current @ Low Frequency:	1.26A @ 120Hz
Applications:	General Purpose
Ratings:	--
Polarization:	Polar
Series:	B41252
Lifetime @ Temp.:	2000 Hrs @ 105°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	35V
Tolerance:	±20%
Capacitance:	3300µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors, often referred to as electrolytic capacitors, are a type of capacitor that uses an electrolytic solution as its dielectric medium. They are used to store electrical energy and release it as a charge, allowing them to be used for filtering, timing or energy storage applications. The B41252A7338M is an example of an aluminum electrolytic capacitor. This capacitor is ideal for use in high-frequency switching power supplies, LED lighting systems, inverter motor control circuits, and other applications that require high-frequency ripple currents.The B41252A7338M is a surface mount aluminum electrolytic capacitor with a wide variety of features. It has a capacitance of 51µF, a rated voltage of 16V, and an operating temperature range of -25°C to 85°C. Its construction is designed to deliver high capacitance values in a small package size, making it suitable for use in tight spaces. It also has a long life of up to 5000 hours and a high ripple current rating of 1.5A.The working principle of aluminum electrolytic capacitors is based on Faraday’s law of electrolysis, which states that when a voltage is applied to two electrodes immersed in an electrolyte, a current will flow through the electrolyte. In an aluminum electrolytic capacitor, the electrodes are two aluminum foils, each of which is separated from the other by a thin layer of oxide. The oxide layer acts as an insulator, so only current can flow between the two foils. When a voltage is applied to the capacitor, an electric field is created between the two foils, causing electrons from the electrolyte to accumulate on the negative foil. The electrons accumulate until the charge on the two foils reaches equilibrium. At this point, the capacitor is fully charged and stores a charge.The amount of current that can flow through an aluminum electrolytic capacitor is limited by its ESR. This is because the oxide layer on each of the electrode foils acts as a resistor, limiting the amount of current that can flow through it. The higher the ESR, the lower the current that can flow through the capacitor, making it more suitable for filtering or timing applications.The B41252A7338M is an aluminum electrolytic capacitor designed for use in high-frequency, high-current switching power supplies, LED lighting systems, inverter motor control circuits, and other applications requiring high-frequency ripple currents. Its construction is designed to deliver a high capacitance value in a small package size, and it has a long life of up to 5000 hours and a high ripple current rating of 1.5A. Its high ESR limits the current that can flow through the capacitor, making it an ideal choice for use in filtering or timing applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description