B43254D2567M

Polarization:	Polar
Package / Case:	Radial, Can - Snap-In
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	1.063" (27.00mm)
Size / Dimension:	1.378" Dia (35.00mm)
Lead Spacing:	0.394" (10.00mm)
Ripple Current @ High Frequency:	2.635A @ 20kHz
Ripple Current @ Low Frequency:	1.7A @ 120Hz
Applications:	General Purpose
Ratings:	--
Series:	B43254
Operating Temperature:	-40°C ~ 105°C
Lifetime @ Temp.:	3000 Hrs @ 105°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	200V
Tolerance:	±20%
Capacitance:	560µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors, often referred to as capacitors or ‘electrolytics,’ are passive electronic components which store electrical energy in the form of an electrostatic field. They are especially suited for high-current, high-frequency applications and are able to store significantly more energy than logic-level capacitors. The most common form of aluminum electrolytic capacitor is the polarized type, which is normally used in electronic circuits for power regulation, signal coupling, filtering, storage and timing.The model B43254D2567M is a high-performance aluminum electrolytic capacitor manufactured by Nichicon, and is specially designed for both high-frequency and low-frequency applications. The capacitor has a rated voltage of 35 VDC, a capacitance of 470 µF, and a leakage current of 8 µA. Its maximum operating temperature is 85 °C.The B43254D2567M is suitable for use in circuits that require high transient currents, such as the output circuits of switching power supplies and motorized industrial equipment. It can also be used as decoupling and filtering devices in multimedia systems, and as energy storage elements in power converters. It is also well-suited for use in applications that require high-frequency performance such as LPFs, active filters, and HF amplifiers.The working principle of the B43254D2567M is based on the phenomenon of electrochemical capacitance. This type of capacitor is constructed with two conductive aluminum plates separated by a dielectric material, typically an anodized oxide film. When voltage is applied, it results in the oxidation of the aluminum plates, which reduces their available surface area, thus increasing their capacitance. This effect is greater at higher frequencies, due to the higher rate of oxidation at a given voltage.The B43254D2567M uses a highly sophisticated architecture in which the entire oxide layer is encased in a sleeve of liquid electrolyte instead of being air-dried, which allows for higher capacitance and improved reliability. The use of a wet electrolyte also enables the construction of more complex elements, allowing for the use of multiple layers of oxide and dielectric materials for increased capacitance and stability.Overall, the B43254D2567M is an excellent choice for high-frequency and high-current applications where reliability and performance are of primary concern. Its high capacitance and low leakage current make it suitable for use in a wide range of industrial, audio, and other electronic applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description