B43866C1157M

Operating Temperature:	-40°C ~ 125°C
Package / Case:	Radial, Can
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	1.319" (33.50mm)
Size / Dimension:	0.630" Dia (16.00mm)
Lead Spacing:	0.295" (7.50mm)
Ripple Current @ High Frequency:	650mA @ 100kHz
Applications:	General Purpose
Ratings:	--
Polarization:	Polar
Series:	B43866
Lifetime @ Temp.:	5000 Hrs @ 125°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	160V
Tolerance:	±20%
Capacitance:	150µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

.

Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors, sometimes simply called electrolytic capacitors, are commonly used in modern electrical and electronic equipment in various applications. They are electrical components that increase capacitance and are used to store electrical charge. The B43866C1157M aluminum electrolytic capacitors are popular for their relatively low cost and high capacitance in a reasonably small size. The B43866C1157M aluminum electrolytic capacitor consists of two electrodes separated by a liquid or solid electrolyte. The positive electrode is a conductive rolled aluminum foil with a large surface area and a thin oxide layer. This oxide layer acts as a dielectric which increases the capacitance. The negative electrode is a solid electrolyte that conducts ions from the electrolyte to the aluminum oxide, allowing it to accumulate charge.The main features of the B43866C1157M are its high maximum working voltage, high temperature rating, and low ESR (Equivalent Series Resistance). The maximum working voltage is the maximum DC or AC voltage that the capacitor can withstand without damage. Its temperature rating is the maximum temperature it can operate at without excessive degradation of its capabilities. The low ESR makes it ideal for use in high frequency applications where minimizing losses is important.The B43866C1157M is mainly used for applications that require a large capacitance and high working voltages. These include power supplies, filters, and amplifiers. It can also be used in timing circuits, as its low ESR makes it suitable for applications where a precise timing signal is needed.B43866C1157M aluminum electrolytic capacitors are also used in switch mode power supplies (SMPS). These power supplies convert an AC signal to a DC signal, and the B43866C1157M capacitor helps maintain the stability of the output voltage. They are also used as snubbers in high frequency circuits, providing a smooth transition from on to off states when switching high currents. When using aluminum electrolytic capacitors, proper installation is important. These capacitors are very sensitive to vibration and mechanical shock, so they must be securely mounted to prevent movement and damage. The terminals must not be subjected to any stress as this can cause insulation failure. When soldering the capacitors, they should not be exposed to too much heat as this can damage both the terminal insulation and the aluminum foil inside the capacitor.In summary, the B43866C1157M are aluminum electrolytic capacitors with relatively high capacitance and maximize working voltage in a small size. They are suitable for use in a variety of applications due to their features such as low ESR and high temperature rating. When installing these capacitors, proper mounting and soldering techniques must be followed to prevent mechanical and electrical damage.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description