B57235S0509M000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Inrush Current Limiters (ICL) are important components used to protect electrical and electronic devices from power surges. They are also used in a range of applications to prevent damage caused by high current surges, such as protecting utility networks from transformer inrush, protecting DC/DC converters from sudden changes in power supply voltage, minimizing the size of filtering capacitor banks, and preventing DC motor arcing. The B57235S0509M000 is an example of an ICL made by SEMIKRON.

The B57235S0509M000 is a high current and low resistance ICL, with surge current ratings up to 5A. It is an ideal solution for reducing inrush current and helping to protect equipment, especially when used in high voltage applications. It has a built-in thermal cut-off circuit, which prevents the device from overheating under prolonged current overloads.

The ICL consists of a temperature-controlled, multi-pole reclosing circuit. Its operation consists of two distinct stages: the turn-on stage and the hold stage. In the turn-on stage, the device acts as a low-resistance switch, allowing a large amount of current to pass through. This current surge is limited by the time constant of the device. After the surge has passed, the device switches off and enters the hold state, where it behaves as an open switch with very high impedance.

The B57235S0509M000 can be used in many different applications, including renewable energy systems, motor start-up circuits, UPS systems, telecom equipment, and industrial automation.

In renewable energy systems, the ICL is used to provide over-current protection to wind turbine and solar power systems. It can be used to limit the peak current when the turbine generator starts up, as well as to protect the system from large current surges. In motor start-up circuits, the device can be installed in series with the motor, limiting the inrush current when the motor is switched on.

In UPS systems, the ICL is used to reduce the peak current and help prevent power supply failure. It also helps protect the system from voltage drop and spikes, as well as providing over-current protection. In telecom equipment, it can be used to reduce inrush current and protect the system from voltage changes. It can also be used in industrial automation applications, such as conveyor systems and robots, to protect against over-current and under-voltage.

The B57235S0509M000 is a reliable and cost-effective ICL solution that is used in a wide range of applications. It can help protect electrical and electronic equipment from power surges, and reduce the need for expensive filtering capacitor banks. It is also an ideal solution for minimizing the size and cost of UPS systems.

The specific data is subject to PDF, and the above content is for reference