B57236S0800M000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Inrush current limiters (ICLs) are devices that can be used to limit the initial current spike of an electrical system on startup, thus protecting the system from power surge damage. One such ICL, the B57236S0800M000, is a thermistor-based device designed to limit the current that passes through it when an ac supply is operating at nominal voltage.

An ICL can be described in terms of its application field and working principle. In the case of the B57236S0800M000, its application field is specified as rectifier inlet filters in consumer, office, and commercial electronics equipment. The working principle of this device is based on the fact that its resistance decreases with increasing temperature: as it heats up, less current is able to pass through it, thus limiting the initial surge without having to readjust the system’s components.

The B57236S0800M000 consists of two main parts: a thermistor and a heat sink. The thermistor, typically made from ceramic or metal oxide, is integrated with the heat sink, which helps dissipate the heat generated by the thermistor. The thermistor’s surface is coated with a thin film, which has a high resistance. As the current passes through the thermistor, it undergoes Joule heating increases its temperature, driving its resistance further down.

The resistance of the thermistor is inversely proportional to the current passing through it; as the current rises, the resistance drops, and vice versa. Because the B57236S0800M000 has a large heat capacity, it is capable of dissipating a lot of heat, so it can absorb a high volume of current before reaching its maximum permitted temperature. As the temperature rises, the resistance of the thermistor increases gradually, limiting the surge current before it can damage the system’s components.

The B57236S0800M000 is capable of withstanding high temperature and current levels, making it suitable for high power demand applications. It is designed to fit into a variety of electronic systems and can be used with voltages up to 250 VAC, making it a versatile solution for inrush current applications. Additionally, it has a very low thermal resistance, making it excellent for high-current systems where heat transfer efficiency is important.

Overall, the B57236S0800M000 is an ideal solution for applications that require reliable inrush current protection. Its thermistor-based design makes it capable of absorbing high surges without exceeding safe temperature levels, while its heat sink ensures efficient heat dissipation. As such, it can be used for a variety of applications, from consumer, office, and commercial electronics equipment to high power applications.

The specific data is subject to PDF, and the above content is for reference